[lkml]   [2020]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 1/4] clk: at91: usb: continue if clk_hw_round_rate() return zero
Quoting Claudiu Beznea (2020-01-17 03:36:46)
> clk_hw_round_rate() may call round rate function of its parents. In case
> of SAM9X60 two of USB parrents are PLLA and UPLL. These clocks are
> controlled by clk-sam9x60-pll.c driver. The round rate function for this
> driver is sam9x60_pll_round_rate() which call in turn
> sam9x60_pll_get_best_div_mul(). In case the requested rate is not in the
> proper range (rate < characteristics->output[0].min &&
> rate > characteristics->output[0].max) the sam9x60_pll_round_rate() will
> return a negative number to its caller (called by
> clk_core_round_rate_nolock()). clk_hw_round_rate() will return zero in
> case a negative number is returned by clk_core_round_rate_nolock(). With
> this, the USB clock will continue its rate computation even caller of
> clk_hw_round_rate() returned an error. With this, the USB clock on SAM9X60
> may not chose the best parent. I detected this after a suspend/resume
> cycle on SAM9X60.
> Signed-off-by: Claudiu Beznea <>
> ---

Applied to clk-next

 \ /
  Last update: 2020-02-13 00:32    [W:0.099 / U:6.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site