lkml.org 
[lkml]   [2020]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V1] dt-bindings: mmc: sdhci-msm: Add CQE reg map
Date
CQE feature has been enabled on sdhci-msm. Add CQE reg map
that needs to be supplied for supporting CQE feature.

Change-Id: I788c4bd5b7cbca16bc1030a410cc5550ed7204e1
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
---
Documentation/devicetree/bindings/mmc/sdhci-msm.txt | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
index 7ee639b..eaa0998 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -27,6 +27,11 @@ Required properties:
- reg: Base address and length of the register in the following order:
- Host controller register map (required)
- SD Core register map (required for msm-v4 and below)
+ - CQE register map (Optional, needed only for eMMC and msm-v4.2 above)
+- reg-names: When CQE register map is supplied, below reg-names are required
+ - "hc_mem" for Host controller register map
+ - "core_mem" for SD cpre regoster map
+ - "cqhci_mem" for CQE register map
- interrupts: Should contain an interrupt-specifiers for the interrupts:
- Host controller interrupt (required)
- pinctrl-names: Should contain only one value - "default".
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2020-02-11 16:30    [W:0.102 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site