lkml.org 
[lkml]   [2020]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/2] clk: qcom: videocc: Update the clock flag for video_cc_vcodec0_core_clk
Date
The clock disable signal for video_cc_vcodec0_core_clk is tied to
vcodec0_gdsc which is supported in the HW control mode. Thus turning off
the clock would be taken care automatically when the GDSC turns OFF by
hardware and clock driver does not require to poll on the CLK_OFF bit.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
drivers/clk/qcom/videocc-sc7180.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/videocc-sc7180.c b/drivers/clk/qcom/videocc-sc7180.c
index c363c3c..276e5ec 100644
--- a/drivers/clk/qcom/videocc-sc7180.c
+++ b/drivers/clk/qcom/videocc-sc7180.c
@@ -97,7 +97,7 @@ static struct clk_branch video_cc_vcodec0_axi_clk = {

static struct clk_branch video_cc_vcodec0_core_clk = {
.halt_reg = 0x890,
- .halt_check = BRANCH_HALT,
+ .halt_check = BRANCH_HALT_VOTED,
.clkr = {
.enable_reg = 0x890,
.enable_mask = BIT(0),
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
\
 
 \ /
  Last update: 2020-02-11 13:15    [W:0.053 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site