[lkml]   [2020]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 5.5 325/367] net: systemport: Avoid RBUF stuck in Wake-on-LAN mode
From: Florian Fainelli <>

[ Upstream commit 263a425a482fc495d6d3f9a29b9103a664c38b69 ]

After a number of suspend and resume cycles, it is possible for the RBUF
to be stuck in Wake-on-LAN mode, despite the MPD enable bit being
cleared which instructed the RBUF to exit that mode.

Avoid creating that problematic condition by clearing the RX_EN and
TX_EN bits in the UniMAC prior to disable the Magic Packet Detector
logic which is guaranteed to make the RBUF exit Wake-on-LAN mode.

Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <>
Signed-off-by: David S. Miller <>
Signed-off-by: Greg Kroah-Hartman <>
drivers/net/ethernet/broadcom/bcmsysport.c | 3 +++
1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -2728,6 +2728,9 @@ static int __maybe_unused bcm_sysport_re


+ /* Disable the UniMAC RX/TX */
+ umac_enable_set(priv, CMD_RX_EN | CMD_TX_EN, 0);
/* We may have been suspended and never received a WOL event that
* would turn off MPD detection, take care of that now

 \ /
  Last update: 2020-02-10 13:55    [W:0.845 / U:0.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site