lkml.org 
[lkml]   [2020]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.5 021/367] net: phy: at803x: disable vddio regulator
Date
From: Michael Walle <michael@walle.cc>

[ Upstream commit 2318ca8aef3877da2b16b92edce47a497370a86e ]

The probe() might enable a VDDIO regulator, which needs to be disabled
again before calling regulator_put(). Add a remove() function.

Fixes: 2f664823a470 ("net: phy: at803x: add device tree binding")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/phy/at803x.c | 11 +++++++++++
1 file changed, 11 insertions(+)

--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -489,6 +489,14 @@ static int at803x_probe(struct phy_devic
return at803x_parse_dt(phydev);
}

+static void at803x_remove(struct phy_device *phydev)
+{
+ struct at803x_priv *priv = phydev->priv;
+
+ if (priv->vddio)
+ regulator_disable(priv->vddio);
+}
+
static int at803x_clk_out_config(struct phy_device *phydev)
{
struct at803x_priv *priv = phydev->priv;
@@ -711,6 +719,7 @@ static struct phy_driver at803x_driver[]
.name = "Qualcomm Atheros AR8035",
.phy_id_mask = AT803X_PHY_ID_MASK,
.probe = at803x_probe,
+ .remove = at803x_remove,
.config_init = at803x_config_init,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
@@ -726,6 +735,7 @@ static struct phy_driver at803x_driver[]
.name = "Qualcomm Atheros AR8030",
.phy_id_mask = AT803X_PHY_ID_MASK,
.probe = at803x_probe,
+ .remove = at803x_remove,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
.set_wol = at803x_set_wol,
@@ -741,6 +751,7 @@ static struct phy_driver at803x_driver[]
.name = "Qualcomm Atheros AR8031/AR8033",
.phy_id_mask = AT803X_PHY_ID_MASK,
.probe = at803x_probe,
+ .remove = at803x_remove,
.config_init = at803x_config_init,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,

\
 
 \ /
  Last update: 2020-02-10 13:43    [W:0.941 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site