lkml.org 
[lkml]   [2020]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] ASoC: da7219: check SRM lock in trigger callback
Date
On 10 February 2020 08:17, Brent Lu wrote:

> Intel sst firmware turns on BCLK/WCLK in START Ioctl call which timing is
> later than the DAPM SUPPLY event handler da7219_dai_event is called (in
> PREPARED state). Therefore, the SRM lock check always fail.
>
> Moving the check to trigger callback could ensure the SRM is locked before
> DSP starts to process data and avoid possisble noise.

Could ensure? This change seems specific to Intel DSP based systems, at least
from the description. Having looked through the core, the trigger code for a
codec is seemingly always called before the trigger for the CPU. How will this
work for other platforms, assuming their clocks are enabled in the CPU DAI
trigger function by default?

Can we always guarantee the CPU side isn't going to send anything other than 0s
until after SRM has locked?

>
> Signed-off-by: Brent Lu <brent.lu@intel.com>
> ---
> sound/soc/codecs/da7219.c | 68 +++++++++++++++++++++++++++++++--------
> --------
> 1 file changed, 45 insertions(+), 23 deletions(-)
>
> diff --git a/sound/soc/codecs/da7219.c b/sound/soc/codecs/da7219.c
> index f83a6ea..0fb5ea5 100644
> --- a/sound/soc/codecs/da7219.c
> +++ b/sound/soc/codecs/da7219.c
> @@ -794,9 +794,7 @@ static int da7219_dai_event(struct snd_soc_dapm_widget
> *w,
> struct snd_soc_component *component =
> snd_soc_dapm_to_component(w->dapm);
> struct da7219_priv *da7219 =
> snd_soc_component_get_drvdata(component);
> struct clk *bclk = da7219->dai_clks[DA7219_DAI_BCLK_IDX];
> - u8 pll_ctrl, pll_status;
> - int i = 0, ret;
> - bool srm_lock = false;
> + int ret;
>
> switch (event) {
> case SND_SOC_DAPM_PRE_PMU:
> @@ -820,26 +818,6 @@ static int da7219_dai_event(struct
> snd_soc_dapm_widget *w,
> /* PC synchronised to DAI */
> snd_soc_component_update_bits(component,
> DA7219_PC_COUNT,
> DA7219_PC_FREERUN_MASK, 0);
> -
> - /* Slave mode, if SRM not enabled no need for status checks */
> - pll_ctrl = snd_soc_component_read32(component,
> DA7219_PLL_CTRL);
> - if ((pll_ctrl & DA7219_PLL_MODE_MASK) !=
> DA7219_PLL_MODE_SRM)
> - return 0;
> -
> - /* Check SRM has locked */
> - do {
> - pll_status = snd_soc_component_read32(component,
> DA7219_PLL_SRM_STS);
> - if (pll_status & DA7219_PLL_SRM_STS_SRM_LOCK) {
> - srm_lock = true;
> - } else {
> - ++i;
> - msleep(50);
> - }
> - } while ((i < DA7219_SRM_CHECK_RETRIES) && (!srm_lock));
> -
> - if (!srm_lock)
> - dev_warn(component->dev, "SRM failed to lock\n");
> -
> return 0;
> case SND_SOC_DAPM_POST_PMD:
> /* PC free-running */
> @@ -1658,12 +1636,56 @@ static int da7219_hw_params(struct
> snd_pcm_substream *substream,
> return 0;
> }
>
> +static int da7219_set_dai_trigger(struct snd_pcm_substream *substream, int
> cmd,
> + struct snd_soc_dai *dai)
> +{
> + struct snd_soc_component *component = dai->component;
> + u8 pll_ctrl, pll_status;
> + int i = 0;
> + bool srm_lock = false;
> +
> + switch (cmd) {
> + case SNDRV_PCM_TRIGGER_START:
> + /* Slave mode, if SRM not enabled no need for status checks */
> + pll_ctrl = snd_soc_component_read32(component,
> DA7219_PLL_CTRL);

I was under the impression that 'trigger()' was atomic? We'd have to have
some kind of workqueue to do all of this, which means we'd almost certainly lose
some PCM data at the start of a stream.

> + if ((pll_ctrl & DA7219_PLL_MODE_MASK) !=
> DA7219_PLL_MODE_SRM)
> + return 0;
> +
> + /* Check SRM has locked */
> + do {
> + pll_status = snd_soc_component_read32(component,
> + DA7219_PLL_SRM_STS);
> + if (pll_status & DA7219_PLL_SRM_STS_SRM_LOCK) {
> + srm_lock = true;
> + } else {
> + ++i;
> + msleep(50);
> + }
> + } while ((i < DA7219_SRM_CHECK_RETRIES) && (!srm_lock));
> +
> + if (!srm_lock)
> + dev_warn(component->dev, "SRM failed to lock\n");
> +
> + break;
> + case SNDRV_PCM_TRIGGER_RESUME:
> + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
> + case SNDRV_PCM_TRIGGER_STOP:
> + case SNDRV_PCM_TRIGGER_SUSPEND:
> + case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> + default:
> + break;
> + }
> +
> + return 0;
> +}
> +
> static const struct snd_soc_dai_ops da7219_dai_ops = {
> .hw_params = da7219_hw_params,
> .set_sysclk = da7219_set_dai_sysclk,
> .set_pll = da7219_set_dai_pll,
> .set_fmt = da7219_set_dai_fmt,
> .set_tdm_slot = da7219_set_dai_tdm_slot,
> + .trigger = da7219_set_dai_trigger,
> };
>
> #define DA7219_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |
> SNDRV_PCM_FMTBIT_S20_3LE |\
> --
> 2.7.4

\
 
 \ /
  Last update: 2020-02-10 15:35    [W:0.180 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site