[lkml]   [2020]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[patch 3/8] rtc: cmos: Make rtc_cmos sync offset correct
The offset for rtc_cmos must be -500ms to work correctly with the current
implementation of rtc_set_ntp_time() due to the following:

tsched twrite(t2.tv_sec - 1) t2 (seconds increment)

twrite - tsched is the transport time for the write to hit the device,
which is negligible for this chip because it's accessed directly.

t2 - twrite = 500ms according to the datasheet.

But rtc_set_ntp_time() calculation of tsched is:

tsched = t2 - 1sec - (t2 - twrite)

The default for the sync offset is 500ms which means that the write happens
at t2 - 1.5 seconds which is obviously off by a second for this device.

Make the offset -500ms so it works correct.

Signed-off-by: Thomas Gleixner <>
drivers/rtc/rtc-cmos.c | 3 +++
1 file changed, 3 insertions(+)

--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -868,6 +868,9 @@ cmos_do_probe(struct device *dev, struct
if (retval)
goto cleanup2;

+ /* Set the sync offset for the periodic 11min update correct */
+ cmos_rtc.rtc->set_offset_nsec = -(NSEC_PER_SEC / 2);
/* export at least the first block of NVRAM */
nvmem_cfg.size = address_space - NVRAM_OFFSET;
if (rtc_nvmem_register(cmos_rtc.rtc, &nvmem_cfg))
 \ /
  Last update: 2020-12-06 23:08    [W:0.149 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site