lkml.org 
[lkml]   [2020]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] mmc: core: MMC_CAP2_HS200_1_8V_SDR with mmc-hs400-1_8v
Date
With the introduction of an independent hs400 timing select,
PATCH 2/3 the availability of the hs200 caps will not checked.
Therefore cleanup and remove MMC_CAP2_HS200_1_8V_SDR /
MMC_CAP2_HS200_1_2V_SDR from host->caps2 when mmc-hs400-1_8v
or mmc-hs400-1_2v is used in the dts.

Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
---
drivers/mmc/core/host.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 96b2ca1f1b06..46fde60a2372 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -295,9 +295,9 @@ int mmc_of_parse(struct mmc_host *host)
if (device_property_read_bool(dev, "mmc-hs200-1_2v"))
host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
if (device_property_read_bool(dev, "mmc-hs400-1_8v"))
- host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
+ host->caps2 |= MMC_CAP2_HS400_1_8V;
if (device_property_read_bool(dev, "mmc-hs400-1_2v"))
- host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
+ host->caps2 |= MMC_CAP2_HS400_1_2V;
if (device_property_read_bool(dev, "mmc-hs400-enhanced-strobe"))
host->caps2 |= MMC_CAP2_HS400_ES;
if (device_property_read_bool(dev, "no-sdio"))
--
2.20.1
\
 
 \ /
  Last update: 2020-12-03 10:38    [W:0.074 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site