lkml.org 
[lkml]   [2020]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v13 07/15] iommu/smmuv3: Allow stage 1 invalidation with unmanaged ASIDs
Date
Hi Eric,

> -----Original Message-----
> From: kvmarm-bounces@lists.cs.columbia.edu
> [mailto:kvmarm-bounces@lists.cs.columbia.edu] On Behalf Of Auger Eric
> Sent: 01 December 2020 13:59
> To: wangxingang <wangxingang5@huawei.com>
> Cc: Xieyingtai <xieyingtai@huawei.com>; jean-philippe@linaro.org;
> kvm@vger.kernel.org; maz@kernel.org; joro@8bytes.org; will@kernel.org;
> iommu@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> vivek.gautam@arm.com; alex.williamson@redhat.com;
> zhangfei.gao@linaro.org; robin.murphy@arm.com;
> kvmarm@lists.cs.columbia.edu; eric.auger.pro@gmail.com
> Subject: Re: [PATCH v13 07/15] iommu/smmuv3: Allow stage 1 invalidation with
> unmanaged ASIDs
>
> Hi Xingang,
>
> On 12/1/20 2:33 PM, Xingang Wang wrote:
> > Hi Eric
> >
> > On Wed, 18 Nov 2020 12:21:43, Eric Auger wrote:
> >> @@ -1710,7 +1710,11 @@ static void arm_smmu_tlb_inv_context(void
> *cookie)
> >> * insertion to guarantee those are observed before the TLBI. Do be
> >> * careful, 007.
> >> */
> >> - if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
> >> + if (ext_asid >= 0) { /* guest stage 1 invalidation */
> >> + cmd.opcode = CMDQ_OP_TLBI_NH_ASID;
> >> + cmd.tlbi.asid = ext_asid;
> >> + cmd.tlbi.vmid = smmu_domain->s2_cfg.vmid;
> >> + } else if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
> >
> > Found a problem here, the cmd for guest stage 1 invalidation is built,
> > but it is not delivered to smmu.
> >
>
> Thank you for the report. I will fix that soon. With that fixed, have
> you been able to run vSVA on top of the series. Do you need other stuff
> to be fixed at SMMU level?

I am seeing another issue with this series. This is when you have the vSMMU
in non-strict mode(iommu.strict=0). Any network pass-through dev with iperf run
will be enough to reproduce the issue. It may randomly stop/hang.

It looks like the .flush_iotlb_all from guest is not propagated down to the host
correctly. I have a temp hack to fix this in Qemu wherein CMDQ_OP_TLBI_NH_ASID
will result in a CACHE_INVALIDATE with IOMMU_INV_GRANU_PASID flag and archid
set.

Please take a look and let me know.

As I am going to respin soon, please let me
> know what is the best branch to rebase to alleviate your integration.

Please find the latest kernel and Qemu branch with vSVA support added here,

https://github.com/hisilicon/kernel-dev/tree/5.10-rc4-2stage-v13-vsva
https://github.com/hisilicon/qemu/tree/v5.2.0-rc1-2stage-rfcv7-vsva

I have done some basic minimum vSVA tests on a HiSilicon D06 board with
a zip dev that supports STALL. All looks good so far apart from the issues
that have been already reported/discussed.

The kernel branch is actually a rebase of sva/uacce related patches from a
Linaro branch here,

https://github.com/Linaro/linux-kernel-uadk/tree/uacce-devel-5.10

I think going forward it will be good(if possible) to respin your series on top of
a sva branch with STALL/PRI support added.

Hi Jean/zhangfei,
Is it possible to have a branch with minimum required SVA/UACCE related patches
that are already public and can be a "stable" candidate for future respin of Eric's series?
Please share your thoughts.

Thanks,
Shameer

> Best Regards
>
> Eric
>
> _______________________________________________
> kvmarm mailing list
> kvmarm@lists.cs.columbia.edu
> https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

\
 
 \ /
  Last update: 2020-12-03 19:45    [W:0.290 / U:0.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site