lkml.org 
[lkml]   [2020]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 3/3] phy: phy-brcm-usb: support PHY on the BCM4908
Date
From: Rafał Miłecki <rafal@milecki.pl>

BCM4908 seems to have slightly different registers but works when
programmed just like the STB one.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
V2: Update Kconfig as well
---
drivers/phy/broadcom/Kconfig | 3 ++-
drivers/phy/broadcom/phy-brcm-usb.c | 4 ++++
2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index a1f1a9c90d0d..09256339bd04 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -91,10 +91,11 @@ config PHY_BRCM_SATA

config PHY_BRCM_USB
tristate "Broadcom STB USB PHY driver"
- depends on ARCH_BRCMSTB || COMPILE_TEST
+ depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
depends on OF
select GENERIC_PHY
select SOC_BRCMSTB
+ default ARCH_BCM4908
default ARCH_BRCMSTB
help
Enable this to support the Broadcom STB USB PHY.
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index 99fbc7e4138b..63f922a5f29b 100644
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -285,6 +285,10 @@ static const struct match_chip_info chip_info_7445 = {
};

static const struct of_device_id brcm_usb_dt_ids[] = {
+ {
+ .compatible = "brcm,bcm4908-usb-phy",
+ .data = &chip_info_7445,
+ },
{
.compatible = "brcm,bcm7216-usb-phy",
.data = &chip_info_7216,
--
2.26.2
\
 
 \ /
  Last update: 2020-12-21 06:27    [W:0.049 / U:3.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site