[lkml]   [2020]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v8 0/3] Use the generic PHY framework for Ingenic USB PHY.
Only add new generic-PHY driver, without removing the old one. Because the
jz4740-musb driver is not ready to use the generic PHY framework. When the
jz4740-musb driver is modified to use the generic PHY framework, the old
jz4770-phy driver can be "retired".

1.Add an extra blank line between "devm_of_phy_provider_register" and "return".
2.Remove unnecessary "phy_set_drvdata".
3.Add Paul Cercueil's Reviewed-by.

1.Revert the removal of "phy_set_drvdata" in v5, removing "phy_set_drvdata" will
cause a kernel panic on CI20.
Reported-by: H. Nikolaus Schaller <>
2.Rewrite the macro definitions, replace the original code with "FIELD_PREP()"
and "u32p_replace_bits()" according to Vinod Koul's suggestion.

1.Remove the stray tab character.
2.Remove unnecessary "platform_set_drvdata".
3.Remove the "dev" field in priv structure, and use &phy->dev instead.

Add support for Ingenic JZ4775 SoC and X2000 SoC.

周琰杰 (Zhou Yanjie) (3):
USB: PHY: JZ4770: Remove unnecessary function calls.
dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000.
PHY: Ingenic: Add USB PHY driver using generic PHY framework.

.../ingenic,phy-usb.yaml} | 4 +-
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/ingenic/Kconfig | 12 +
drivers/phy/ingenic/Makefile | 2 +
drivers/phy/ingenic/phy-ingenic-usb.c | 412 +++++++++++++++++++++
drivers/usb/phy/phy-jz4770.c | 2 +-
7 files changed, 432 insertions(+), 2 deletions(-)
rename Documentation/devicetree/bindings/{usb/ingenic,jz4770-phy.yaml => phy/ingenic,phy-usb.yaml} (89%)
create mode 100644 drivers/phy/ingenic/Kconfig
create mode 100644 drivers/phy/ingenic/Makefile
create mode 100644 drivers/phy/ingenic/phy-ingenic-usb.c


 \ /
  Last update: 2020-11-07 10:50    [W:0.036 / U:0.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site