lkml.org 
[lkml]   [2020]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 4/5] arm64: dts: imx8mn: Add power-domain reference in USB controller
Date
The USB OTG controller cannot be used until the power-domain is enabled
unless it was started in the bootloader.

Adding the power-domain reference to the OTG node allows the OTG
controller to operate.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2: No change

arch/arm64/boot/dts/freescale/imx8mn.dtsi | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index c37dee13057a..5e4b6934de40 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -968,6 +968,7 @@ usbotg1: usb@32e40000 {
assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
fsl,usbphy = <&usbphynop1>;
fsl,usbmisc = <&usbmisc1 0>;
+ power-domains = <&pgc_otg1>;
status = "disabled";
};

--
2.25.1
\
 
 \ /
  Last update: 2020-11-07 15:01    [W:0.055 / U:2.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site