lkml.org 
[lkml]   [2020]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 01/11] iio: adc: at91_adc: remove platform data
On Sat, 28 Nov 2020 15:23:42 +0100
Alexandre Belloni <alexandre.belloni@bootlin.com> wrote:

> Hi,
>
> On 28/11/2020 14:04:27+0000, Jonathan Cameron wrote:
> > On Tue, 17 Nov 2020 15:06:46 +0100
> > Alexandre Belloni <alexandre.belloni@bootlin.com> wrote:
> >
> > > The at91 platforms have been DT only for a while, remove platform data.
> > >
> > > Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> > > Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
> >
> > Hi Alexandre,
> >
> > I'd completely forgotten that we actually had a similar patch that
> > is already applied from Alexandru back in September.
> >
>
> I actually have seen that yesterday too. I even reviewed them...
>
> > Given vast majority matched, I've just changed your patch into one
> > that drops the id_table (which Alexandru didn't do).
> >
> > So with that tweak applied to the togreg branch of iio.git.
> >
>
> Ok, thanks, I guess you didn't push yet, I wanted to check and I didn't
> find the patches on kernel.org.

I've actually just backed my try at this out. It gets a bit messy around
patch 6-7 so I'd rather you did a rebase.

Please rebase on current togreg branch.

Thanks,

Jonathan

>
>
>
> > Thanks,
> >
> > Jonathan
> >
> > > ---
> > > drivers/iio/adc/at91_adc.c | 80 +++++++-------------------
> > > include/linux/platform_data/at91_adc.h | 49 ----------------
> > > 2 files changed, 22 insertions(+), 107 deletions(-)
> > > delete mode 100644 include/linux/platform_data/at91_adc.h
> > >
> > > diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
> > > index 9b2c548fae95..62bd35af8b13 100644
> > > --- a/drivers/iio/adc/at91_adc.c
> > > +++ b/drivers/iio/adc/at91_adc.c
> > > @@ -22,8 +22,6 @@
> > > #include <linux/slab.h>
> > > #include <linux/wait.h>
> > >
> > > -#include <linux/platform_data/at91_adc.h>
> > > -
> > > #include <linux/iio/iio.h>
> > > #include <linux/iio/buffer.h>
> > > #include <linux/iio/trigger.h>
> > > @@ -153,6 +151,25 @@
> > > #define TOUCH_SHTIM 0xa
> > > #define TOUCH_SCTIM_US 10 /* 10us for the Touchscreen Switches Closure Time */
> > >
> > > +enum atmel_adc_ts_type {
> > > + ATMEL_ADC_TOUCHSCREEN_NONE = 0,
> > > + ATMEL_ADC_TOUCHSCREEN_4WIRE = 4,
> > > + ATMEL_ADC_TOUCHSCREEN_5WIRE = 5,
> > > +};
> > > +
> > > +/**
> > > + * struct at91_adc_trigger - description of triggers
> > > + * @name: name of the trigger advertised to the user
> > > + * @value: value to set in the ADC's trigger setup register
> > > + * to enable the trigger
> > > + * @is_external: Does the trigger rely on an external pin?
> > > + */
> > > +struct at91_adc_trigger {
> > > + const char *name;
> > > + u8 value;
> > > + bool is_external;
> > > +};
> > > +
> > > /**
> > > * struct at91_adc_reg_desc - Various informations relative to registers
> > > * @channel_base: Base offset for the channel data registers
> > > @@ -875,9 +892,6 @@ static int at91_adc_probe_dt(struct iio_dev *idev,
> > > int i = 0, ret;
> > > u32 prop;
> > >
> > > - if (!node)
> > > - return -EINVAL;
> > > -
> > > st->caps = (struct at91_adc_caps *)
> > > of_match_device(at91_adc_dt_ids, &pdev->dev)->data;
> > >
> > > @@ -960,30 +974,6 @@ static int at91_adc_probe_dt(struct iio_dev *idev,
> > > return ret;
> > > }
> > >
> > > -static int at91_adc_probe_pdata(struct at91_adc_state *st,
> > > - struct platform_device *pdev)
> > > -{
> > > - struct at91_adc_data *pdata = pdev->dev.platform_data;
> > > -
> > > - if (!pdata)
> > > - return -EINVAL;
> > > -
> > > - st->caps = (struct at91_adc_caps *)
> > > - platform_get_device_id(pdev)->driver_data;
> > > -
> > > - st->use_external = pdata->use_external_triggers;
> > > - st->vref_mv = pdata->vref;
> > > - st->channels_mask = pdata->channels_used;
> > > - st->num_channels = st->caps->num_channels;
> > > - st->startup_time = pdata->startup_time;
> > > - st->trigger_number = pdata->trigger_number;
> > > - st->trigger_list = pdata->trigger_list;
> > > - st->registers = &st->caps->registers;
> > > - st->touchscreen_type = pdata->touchscreen_type;
> > > -
> > > - return 0;
> > > -}
> > > -
> > > static const struct iio_info at91_adc_info = {
> > > .read_raw = &at91_adc_read_raw,
> > > };
> > > @@ -1160,15 +1150,9 @@ static int at91_adc_probe(struct platform_device *pdev)
> > >
> > > st = iio_priv(idev);
> > >
> > > - if (pdev->dev.of_node)
> > > - ret = at91_adc_probe_dt(idev, pdev);
> > > - else
> > > - ret = at91_adc_probe_pdata(st, pdev);
> > > -
> > > - if (ret) {
> > > - dev_err(&pdev->dev, "No platform data available.\n");
> > > - return -EINVAL;
> > > - }
> > > + ret = at91_adc_probe_dt(idev, pdev);
> > > + if (ret)
> > > + return ret;
> > >
> > > platform_set_drvdata(pdev, idev);
> > >
> > > @@ -1444,29 +1428,9 @@ static const struct of_device_id at91_adc_dt_ids[] = {
> > > };
> > > MODULE_DEVICE_TABLE(of, at91_adc_dt_ids);
> > >
> > > -static const struct platform_device_id at91_adc_ids[] = {
> > > - {
> > > - .name = "at91sam9260-adc",
> > > - .driver_data = (unsigned long)&at91sam9260_caps,
> > > - }, {
> > > - .name = "at91sam9rl-adc",
> > > - .driver_data = (unsigned long)&at91sam9rl_caps,
> > > - }, {
> > > - .name = "at91sam9g45-adc",
> > > - .driver_data = (unsigned long)&at91sam9g45_caps,
> > > - }, {
> > > - .name = "at91sam9x5-adc",
> > > - .driver_data = (unsigned long)&at91sam9x5_caps,
> > > - }, {
> > > - /* terminator */
> > > - }
> > > -};
> > > -MODULE_DEVICE_TABLE(platform, at91_adc_ids);
> > > -
> > > static struct platform_driver at91_adc_driver = {
> > > .probe = at91_adc_probe,
> > > .remove = at91_adc_remove,
> > > - .id_table = at91_adc_ids,
> > > .driver = {
> > > .name = DRIVER_NAME,
> > > .of_match_table = of_match_ptr(at91_adc_dt_ids),
> > > diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h
> > > deleted file mode 100644
> > > index f20eaeb827ce..000000000000
> > > --- a/include/linux/platform_data/at91_adc.h
> > > +++ /dev/null
> > > @@ -1,49 +0,0 @@
> > > -/* SPDX-License-Identifier: GPL-2.0-or-later */
> > > -/*
> > > - * Copyright (C) 2011 Free Electrons
> > > - */
> > > -
> > > -#ifndef _AT91_ADC_H_
> > > -#define _AT91_ADC_H_
> > > -
> > > -enum atmel_adc_ts_type {
> > > - ATMEL_ADC_TOUCHSCREEN_NONE = 0,
> > > - ATMEL_ADC_TOUCHSCREEN_4WIRE = 4,
> > > - ATMEL_ADC_TOUCHSCREEN_5WIRE = 5,
> > > -};
> > > -
> > > -/**
> > > - * struct at91_adc_trigger - description of triggers
> > > - * @name: name of the trigger advertised to the user
> > > - * @value: value to set in the ADC's trigger setup register
> > > - to enable the trigger
> > > - * @is_external: Does the trigger rely on an external pin?
> > > - */
> > > -struct at91_adc_trigger {
> > > - const char *name;
> > > - u8 value;
> > > - bool is_external;
> > > -};
> > > -
> > > -/**
> > > - * struct at91_adc_data - platform data for ADC driver
> > > - * @channels_used: channels in use on the board as a bitmask
> > > - * @startup_time: startup time of the ADC in microseconds
> > > - * @trigger_list: Triggers available in the ADC
> > > - * @trigger_number: Number of triggers available in the ADC
> > > - * @use_external_triggers: does the board has external triggers availables
> > > - * @vref: Reference voltage for the ADC in millivolts
> > > - * @touchscreen_type: If a touchscreen is connected, its type (4 or 5 wires)
> > > - */
> > > -struct at91_adc_data {
> > > - unsigned long channels_used;
> > > - u8 startup_time;
> > > - struct at91_adc_trigger *trigger_list;
> > > - u8 trigger_number;
> > > - bool use_external_triggers;
> > > - u16 vref;
> > > - enum atmel_adc_ts_type touchscreen_type;
> > > -};
> > > -
> > > -extern void __init at91_add_device_adc(struct at91_adc_data *data);
> > > -#endif
> >
>

\
 
 \ /
  Last update: 2020-11-28 22:55    [W:0.053 / U:14.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site