lkml.org 
[lkml]   [2020]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: drm/bridge: anx7625: Add power supplies
On Thu, Nov 12, 2020 at 04:37:03PM +0800, Hsin-Yi Wang wrote:
> anx7625 requires 3 power supply regulators.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
> .../display/bridge/analogix,anx7625.yaml | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> index 60585a4fc22b..1aa08f10d894 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> @@ -34,6 +34,18 @@ properties:
> description: used for reset chip control, RESET_N pin B7.
> maxItems: 1
>
> + vdd10-supply:
> + description: Regulator that provides the supply 1.0V power.
> + maxItems: 1
> +
> + vdd18-supply:
> + description: Regulator that provides the supply 1.8V power.
> + maxItems: 1
> +
> + vdd33-supply:
> + description: Regulator that provides the supply 3.3V power.
> + maxItems: 1

Supplies are always a single item, so you can drop maxItems.

> +
> ports:
> type: object
>
> @@ -55,6 +67,9 @@ properties:
> required:
> - compatible
> - reg
> + - vdd10-supply
> + - vdd18-supply
> + - vdd33-supply
> - ports
>
> additionalProperties: false
> @@ -72,6 +87,9 @@ examples:
> reg = <0x58>;
> enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
> reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
> + vdd10-supply = <&pp1000_mipibrdg>;
> + vdd18-supply = <&pp1800_mipibrdg>;
> + vdd33-supply = <&pp3300_mipibrdg>;
>
> ports {
> #address-cells = <1>;
> --
> 2.29.2.222.g5d2a92d10f8-goog
>

\
 
 \ /
  Last update: 2020-11-21 13:54    [W:0.048 / U:1.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site