lkml.org 
[lkml]   [2020]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 2/2] spi: Add generic SPI multiplexer
From
Date
On Tue, 2020-11-17 at 00:08 +0000, Chris Packham wrote:
> On 14/11/20 4:46 am, Nicolas Saenz Julienne wrote:
> > Upon registering spi-mux's devices through spi_add_device() the kernel gets
> > stuck waiting for the 'spi_add_lock' mutex to be released. The mutex happens to
> > be held by spi-mux's parent SPI bus, which unluckily, is waiting for spi-mux's
> > probe to finish before releasing it.
>
> I just re-tested my system with v5.10.0-rc4 and didn't see any problem.
> My dts is pretty similar to yours the only obvious thing missing is
> `mux-control-names = "spi";` and I also set `#size-cells = <1>;` (let me
> know if you want me to post the whole thing).
>
> It might be dependent on the host spi controller. The re-test I just did
> was on a board using the spi-orion.c driver and I tested my original
> change on a board using spi-bcm-qspi.c (I haven't got the board handy
> right now but I could go and find one if necessary).

Found the issue, something silly on my side. Sorry for the noise.

Regards,
Nicolas

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-11-20 17:39    [W:0.057 / U:1.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site