lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 18/29] scsi: pm_8001: Drop PCI Wakeup calls from .resume
Date
The driver calls pci_enable_wake(...., false) in pm8001_pci_resume(), and
there is no corresponding pci_enable_wake(...., true) in
pm8001_pci_suspend(). Either it should do enable-wake the device in
.suspend() or should not invoke pci_enable_wake() at all.

Concluding that this driver doesn't support enable-wake and PCI core calls
pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from
pm8001_pci__resume().

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
---
drivers/scsi/pm8001/pm8001_init.c | 1 -
1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 3cf3e58b6979..d47ed9a33173 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -1327,7 +1327,6 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
"operating state [D%d]\n", pdev, pm8001_ha->name, device_state);

pci_set_power_state(pdev, PCI_D0);
- pci_enable_wake(pdev, PCI_D0, 0);
pci_restore_state(pdev);
rc = pci_enable_device(pdev);
if (rc) {
--
2.28.0
\
 
 \ /
  Last update: 2020-11-02 17:54    [W:0.122 / U:27.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site