lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 16/29] scsi: mpt3sas_scsih: use generic power management
Date
Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.

Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 34 +++++++++++-----------------
1 file changed, 13 insertions(+), 21 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 2d201558b8fb..bc68544856b9 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -11084,20 +11084,18 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return rv;
}

-#ifdef CONFIG_PM
/**
* scsih_suspend - power management suspend main entry point
- * @pdev: PCI device struct
- * @state: PM state change to (usually PCI_D3)
+ * @dev: Device struct
*
* Return: 0 success, anything else error.
*/
-static int
-scsih_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused
+scsih_suspend(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct Scsi_Host *shost;
struct MPT3SAS_ADAPTER *ioc;
- pci_power_t device_state;
int rc;

rc = _scsih_get_shost_and_ioc(pdev, &shost, &ioc);
@@ -11108,25 +11106,23 @@ scsih_suspend(struct pci_dev *pdev, pm_message_t state)
flush_scheduled_work();
scsi_block_requests(shost);
_scsih_nvme_shutdown(ioc);
- device_state = pci_choose_state(pdev, state);
- ioc_info(ioc, "pdev=0x%p, slot=%s, entering operating state [D%d]\n",
- pdev, pci_name(pdev), device_state);
+ ioc_info(ioc, "pdev=0x%p, slot=%s, entering operating state\n",
+ pdev, pci_name(pdev));

- pci_save_state(pdev);
mpt3sas_base_free_resources(ioc);
- pci_set_power_state(pdev, device_state);
return 0;
}

/**
* scsih_resume - power management resume main entry point
- * @pdev: PCI device struct
+ * @dev: Device struct
*
* Return: 0 success, anything else error.
*/
-static int
-scsih_resume(struct pci_dev *pdev)
+static int __maybe_unused
+scsih_resume(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct Scsi_Host *shost;
struct MPT3SAS_ADAPTER *ioc;
pci_power_t device_state = pdev->current_state;
@@ -11139,8 +11135,6 @@ scsih_resume(struct pci_dev *pdev)
ioc_info(ioc, "pdev=0x%p, slot=%s, previous operating state [D%d]\n",
pdev, pci_name(pdev), device_state);

- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
ioc->pdev = pdev;
r = mpt3sas_base_map_resources(ioc);
if (r)
@@ -11151,7 +11145,6 @@ scsih_resume(struct pci_dev *pdev)
mpt3sas_base_start_watchdog(ioc);
return 0;
}
-#endif /* CONFIG_PM */

/**
* scsih_pci_error_detected - Called when a PCI error is detected.
@@ -11453,6 +11446,8 @@ static struct pci_error_handlers _mpt3sas_err_handler = {
.resume = scsih_pci_resume,
};

+static SIMPLE_DEV_PM_OPS(scsih_pm_ops, scsih_suspend, scsih_resume);
+
static struct pci_driver mpt3sas_driver = {
.name = MPT3SAS_DRIVER_NAME,
.id_table = mpt3sas_pci_table,
@@ -11460,10 +11455,7 @@ static struct pci_driver mpt3sas_driver = {
.remove = scsih_remove,
.shutdown = scsih_shutdown,
.err_handler = &_mpt3sas_err_handler,
-#ifdef CONFIG_PM
- .suspend = scsih_suspend,
- .resume = scsih_resume,
-#endif
+ .driver.pm = &scsih_pm_ops,
};

/**
--
2.28.0
\
 
 \ /
  Last update: 2020-11-02 17:54    [W:0.119 / U:1.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site