[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 1/4] drm/bridge: ti-sn65dsi86: Combine register accesses in ti_sn_aux_transfer()

On Thu, Oct 29, 2020 at 6:17 PM Stephen Boyd <> wrote:
> These register reads and writes are sometimes directly next to each
> other in the register address space. Let's use regmap bulk read/write
> APIs to get the data with one transfer instead of multiple i2c
> transfers. This helps cut down on the number of transfers in the case of
> something like reading an EDID where we read in blocks of 16 bytes at a
> time and the last for loop here is sending an i2c transfer for each of
> those 16 bytes, one at a time. Ouch!
> Changes in v2:
> - Combined AUX_CMD register write

The change from v1 to v2 makes me slightly nervous, though I guess
it's fine. Specifically, all the examples in the datasheet show
programming the CMD before the ADDR and LEN. This change will make it
programmed after. Since there's a separate START bit I guess it's OK,
though. Nothing in the datasheet explicitly says that the order in
the examples is the only order that will work...

Reviewed-by: Douglas Anderson <>

 \ /
  Last update: 2020-11-02 17:20    [W:0.167 / U:1.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site