lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On Thu, Oct 29, 2020 at 12:40 AM Vidya Sagar <vidyas@nvidia.com> wrote:
>
> DesignWare core has a TLP digest (TD) override bit in one of the control
> registers of ATU. This bit also needs to be programmed for proper ECRC
> functionality. This is currently identified as an issue with DesignWare
> IP version 4.90a. This patch does the required programming in ATU upon
> querying the system policy for ECRC.
>
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
> ---
> V3:
> * Added 'Reviewed-by: Jingoo Han <jingoohan1@gmail.com>'
>
> V2:
> * Addressed Jingoo's review comment
> * Removed saving 'td' bit information in 'dw_pcie' structure
>
> drivers/pci/controller/dwc/pcie-designware.c | 8 ++++++--
> drivers/pci/controller/dwc/pcie-designware.h | 1 +
> 2 files changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index b5e438b70cd5..cbd651b219d2 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -246,6 +246,8 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
> dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
> upper_32_bits(pci_addr));
> val = type | PCIE_ATU_FUNC_NUM(func_no);
> + if (pci->version == 0x490A)
> + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT;
> val = upper_32_bits(size - 1) ?
> val | PCIE_ATU_INCREASE_REGION_SIZE : val;
> dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, val);
> @@ -294,8 +296,10 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no,
> lower_32_bits(pci_addr));
> dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
> upper_32_bits(pci_addr));
> - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> - PCIE_ATU_FUNC_NUM(func_no));
> + val = type | PCIE_ATU_FUNC_NUM(func_no);
> + if (pci->version == 0x490A)

Is this even possible? Are the non-unroll ATU registers available post 4.80?

Rob

\
 
 \ /
  Last update: 2020-11-02 15:19    [W:0.156 / U:39.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site