lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/23] mtd: nand: onenand: onenand_base: Fix expected kernel-doc formatting
Date
Fixes the following W=1 kernel build warning(s):

drivers/mtd/nand/onenand/onenand_base.c:140: warning: Function parameter or member 'mtd' not described in 'onenand_ooblayout_32_64_ecc'
drivers/mtd/nand/onenand/onenand_base.c:140: warning: Function parameter or member 'section' not described in 'onenand_ooblayout_32_64_ecc'
drivers/mtd/nand/onenand/onenand_base.c:140: warning: Function parameter or member 'oobregion' not described in 'onenand_ooblayout_32_64_ecc'
drivers/mtd/nand/onenand/onenand_base.c:200: warning: Function parameter or member 'addr' not described in 'onenand_readw'
drivers/mtd/nand/onenand/onenand_base.c:212: warning: Function parameter or member 'value' not described in 'onenand_writew'
drivers/mtd/nand/onenand/onenand_base.c:212: warning: Function parameter or member 'addr' not described in 'onenand_writew'
drivers/mtd/nand/onenand/onenand_base.c:225: warning: Function parameter or member 'this' not described in 'onenand_block_address'
drivers/mtd/nand/onenand/onenand_base.c:225: warning: Function parameter or member 'block' not described in 'onenand_block_address'
drivers/mtd/nand/onenand/onenand_base.c:242: warning: Function parameter or member 'this' not described in 'onenand_bufferram_address'
drivers/mtd/nand/onenand/onenand_base.c:242: warning: Function parameter or member 'block' not described in 'onenand_bufferram_address'

NB: Snipped 200 lines for brevity.

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Adrian Hunter <ext-adrian.hunter@nokia.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mtd/nand/onenand/onenand_base.c | 438 ++++++++++++------------
1 file changed, 219 insertions(+), 219 deletions(-)

diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c
index 188b8061e1f79..35f851bf90a3c 100644
--- a/drivers/mtd/nand/onenand/onenand_base.c
+++ b/drivers/mtd/nand/onenand/onenand_base.c
@@ -192,7 +192,7 @@ static const unsigned char ffchars[] = {

/**
* onenand_readw - [OneNAND Interface] Read OneNAND register
- * @param addr address to read
+ * @addr: address to read
*
* Read OneNAND register
*/
@@ -203,8 +203,8 @@ static unsigned short onenand_readw(void __iomem *addr)

/**
* onenand_writew - [OneNAND Interface] Write OneNAND register with value
- * @param value value to write
- * @param addr address to write
+ * @value: value to write
+ * @addr: address to write
*
* Write OneNAND register with value
*/
@@ -215,8 +215,8 @@ static void onenand_writew(unsigned short value, void __iomem *addr)

/**
* onenand_block_address - [DEFAULT] Get block address
- * @param this onenand chip data structure
- * @param block the block
+ * @this: onenand chip data structure
+ * @block: the block
* @return translated block address if DDP, otherwise same
*
* Setup Start Address 1 Register (F100h)
@@ -232,8 +232,8 @@ static int onenand_block_address(struct onenand_chip *this, int block)

/**
* onenand_bufferram_address - [DEFAULT] Get bufferram address
- * @param this onenand chip data structure
- * @param block the block
+ * @this: onenand chip data structure
+ * @block: the block
* @return set DBS value if DDP, otherwise 0
*
* Setup Start Address 2 Register (F101h) for DDP
@@ -249,8 +249,8 @@ static int onenand_bufferram_address(struct onenand_chip *this, int block)

/**
* onenand_page_address - [DEFAULT] Get page address
- * @param page the page address
- * @param sector the sector address
+ * @page: the page address
+ * @sector: the sector address
* @return combined page and sector address
*
* Setup Start Address 8 Register (F107h)
@@ -268,9 +268,9 @@ static int onenand_page_address(int page, int sector)

/**
* onenand_buffer_address - [DEFAULT] Get buffer address
- * @param dataram1 DataRAM index
- * @param sectors the sector address
- * @param count the number of sectors
+ * @dataram:1 DataRAM index
+ * @sectors: the sector address
+ * @count: the number of sectors
* @return the start buffer value
*
* Setup Start Buffer Register (F200h)
@@ -295,8 +295,8 @@ static int onenand_buffer_address(int dataram1, int sectors, int count)

/**
* flexonenand_block- For given address return block number
- * @param this - OneNAND device structure
- * @param addr - Address for which block number is needed
+ * @this: - OneNAND device structure
+ * @addr: - Address for which block number is needed
*/
static unsigned flexonenand_block(struct onenand_chip *this, loff_t addr)
{
@@ -359,7 +359,7 @@ EXPORT_SYMBOL(onenand_addr);

/**
* onenand_get_density - [DEFAULT] Get OneNAND density
- * @param dev_id OneNAND device ID
+ * @dev_id: OneNAND device ID
*
* Get OneNAND density from device ID
*/
@@ -371,8 +371,8 @@ static inline int onenand_get_density(int dev_id)

/**
* flexonenand_region - [Flex-OneNAND] Return erase region of addr
- * @param mtd MTD device structure
- * @param addr address whose erase region needs to be identified
+ * @mtd: MTD device structure
+ * @addr: address whose erase region needs to be identified
*/
int flexonenand_region(struct mtd_info *mtd, loff_t addr)
{
@@ -387,10 +387,10 @@ EXPORT_SYMBOL(flexonenand_region);

/**
* onenand_command - [DEFAULT] Send command to OneNAND device
- * @param mtd MTD device structure
- * @param cmd the command to be sent
- * @param addr offset to read from or write to
- * @param len number of bytes to read or write
+ * @mtd: MTD device structure
+ * @cmd: the command to be sent
+ * @addr: offset to read from or write to
+ * @len: number of bytes to read or write
*
* Send command to OneNAND device. This function is used for middle/large page
* devices (1KB/2KB Bytes per page)
@@ -519,7 +519,7 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le

/**
* onenand_read_ecc - return ecc status
- * @param this onenand chip structure
+ * @this: onenand chip structure
*/
static inline int onenand_read_ecc(struct onenand_chip *this)
{
@@ -543,8 +543,8 @@ static inline int onenand_read_ecc(struct onenand_chip *this)

/**
* onenand_wait - [DEFAULT] wait until the command is done
- * @param mtd MTD device structure
- * @param state state to select the max. timeout value
+ * @mtd: MTD device structure
+ * @state: state to select the max. timeout value
*
* Wait for command done. This applies to all OneNAND command
* Read can take up to 30us, erase up to 2ms and program up to 350us
@@ -625,8 +625,8 @@ static int onenand_wait(struct mtd_info *mtd, int state)

/*
* onenand_interrupt - [DEFAULT] onenand interrupt handler
- * @param irq onenand interrupt number
- * @param dev_id interrupt data
+ * @irq: onenand interrupt number
+ * @dev_id: interrupt data
*
* complete the work
*/
@@ -643,8 +643,8 @@ static irqreturn_t onenand_interrupt(int irq, void *data)

/*
* onenand_interrupt_wait - [DEFAULT] wait until the command is done
- * @param mtd MTD device structure
- * @param state state to select the max. timeout value
+ * @mtd: MTD device structure
+ * @state: state to select the max. timeout value
*
* Wait for command done.
*/
@@ -659,8 +659,8 @@ static int onenand_interrupt_wait(struct mtd_info *mtd, int state)

/*
* onenand_try_interrupt_wait - [DEFAULT] try interrupt wait
- * @param mtd MTD device structure
- * @param state state to select the max. timeout value
+ * @mtd: MTD device structure
+ * @state: state to select the max. timeout value
*
* Try interrupt based wait (It is used one-time)
*/
@@ -689,7 +689,7 @@ static int onenand_try_interrupt_wait(struct mtd_info *mtd, int state)

/*
* onenand_setup_wait - [OneNAND Interface] setup onenand wait method
- * @param mtd MTD device structure
+ * @mtd: MTD device structure
*
* There's two method to wait onenand work
* 1. polling - read interrupt status register
@@ -724,8 +724,8 @@ static void onenand_setup_wait(struct mtd_info *mtd)

/**
* onenand_bufferram_offset - [DEFAULT] BufferRAM offset
- * @param mtd MTD data structure
- * @param area BufferRAM area
+ * @mtd: MTD data structure
+ * @area: BufferRAM area
* @return offset given area
*
* Return BufferRAM offset given area
@@ -747,11 +747,11 @@ static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area)

/**
* onenand_read_bufferram - [OneNAND Interface] Read the bufferram area
- * @param mtd MTD data structure
- * @param area BufferRAM area
- * @param buffer the databuffer to put/get data
- * @param offset offset to read from or write to
- * @param count number of bytes to read/write
+ * @mtd: MTD data structure
+ * @area: BufferRAM area
+ * @buffer: the databuffer to put/get data
+ * @offset: offset to read from or write to
+ * @count: number of bytes to read/write
*
* Read the BufferRAM area
*/
@@ -783,11 +783,11 @@ static int onenand_read_bufferram(struct mtd_info *mtd, int area,

/**
* onenand_sync_read_bufferram - [OneNAND Interface] Read the bufferram area with Sync. Burst mode
- * @param mtd MTD data structure
- * @param area BufferRAM area
- * @param buffer the databuffer to put/get data
- * @param offset offset to read from or write to
- * @param count number of bytes to read/write
+ * @mtd: MTD data structure
+ * @area: BufferRAM area
+ * @buffer: the databuffer to put/get data
+ * @offset: offset to read from or write to
+ * @count: number of bytes to read/write
*
* Read the BufferRAM area with Sync. Burst Mode
*/
@@ -823,11 +823,11 @@ static int onenand_sync_read_bufferram(struct mtd_info *mtd, int area,

/**
* onenand_write_bufferram - [OneNAND Interface] Write the bufferram area
- * @param mtd MTD data structure
- * @param area BufferRAM area
- * @param buffer the databuffer to put/get data
- * @param offset offset to read from or write to
- * @param count number of bytes to read/write
+ * @mtd: MTD data structure
+ * @area: BufferRAM area
+ * @buffer: the databuffer to put/get data
+ * @offset: offset to read from or write to
+ * @count: number of bytes to read/write
*
* Write the BufferRAM area
*/
@@ -864,8 +864,8 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area,

/**
* onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode
- * @param mtd MTD data structure
- * @param addr address to check
+ * @mtd: MTD data structure
+ * @addr: address to check
* @return blockpage address
*
* Get blockpage address at 2x program mode
@@ -888,8 +888,8 @@ static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr)

/**
* onenand_check_bufferram - [GENERIC] Check BufferRAM information
- * @param mtd MTD data structure
- * @param addr address to check
+ * @mtd: MTD data structure
+ * @addr: address to check
* @return 1 if there are valid data, otherwise 0
*
* Check bufferram if there is data we required
@@ -930,9 +930,9 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)

/**
* onenand_update_bufferram - [GENERIC] Update BufferRAM information
- * @param mtd MTD data structure
- * @param addr address to update
- * @param valid valid flag
+ * @mtd: MTD data structure
+ * @addr: address to update
+ * @valid: valid flag
*
* Update BufferRAM information
*/
@@ -963,9 +963,9 @@ static void onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,

/**
* onenand_invalidate_bufferram - [GENERIC] Invalidate BufferRAM information
- * @param mtd MTD data structure
- * @param addr start address to invalidate
- * @param len length to invalidate
+ * @mtd: MTD data structure
+ * @addr: start address to invalidate
+ * @len: length to invalidate
*
* Invalidate BufferRAM information
*/
@@ -986,8 +986,8 @@ static void onenand_invalidate_bufferram(struct mtd_info *mtd, loff_t addr,

/**
* onenand_get_device - [GENERIC] Get chip for selected access
- * @param mtd MTD device structure
- * @param new_state the state which is requested
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
*
* Get the device and lock it for exclusive access
*/
@@ -1024,7 +1024,7 @@ static int onenand_get_device(struct mtd_info *mtd, int new_state)

/**
* onenand_release_device - [GENERIC] release chip
- * @param mtd MTD device structure
+ * @mtd: MTD device structure
*
* Deselect, release chip lock and wake up anyone waiting on the device
*/
@@ -1043,10 +1043,10 @@ static void onenand_release_device(struct mtd_info *mtd)

/**
* onenand_transfer_auto_oob - [INTERN] oob auto-placement transfer
- * @param mtd MTD device structure
- * @param buf destination address
- * @param column oob offset to read from
- * @param thislen oob length to read
+ * @mtd: MTD device structure
+ * @buf: destination address
+ * @column: oob offset to read from
+ * @thislen: oob length to read
*/
static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int column,
int thislen)
@@ -1061,9 +1061,9 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int col

/**
* onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data
- * @param mtd MTD device structure
- * @param addr address to recover
- * @param status return value from onenand_wait / onenand_bbt_wait
+ * @mtd: MTD device structure
+ * @addr: address to recover
+ * @status: return value from onenand_wait / onenand_bbt_wait
*
* MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB page has
* lower page address and MSB page has higher page address in paired pages.
@@ -1104,9 +1104,9 @@ static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status)

/**
* onenand_mlc_read_ops_nolock - MLC OneNAND read main and/or out-of-band
- * @param mtd MTD device structure
- * @param from offset to read from
- * @param ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
*
* MLC OneNAND / Flex-OneNAND has 4KB page size and 4KB dataram.
* So, read-while-load is not present.
@@ -1206,9 +1206,9 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,

/**
* onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band
- * @param mtd MTD device structure
- * @param from offset to read from
- * @param ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
*
* OneNAND read main and/or out-of-band data
*/
@@ -1335,9 +1335,9 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,

/**
* onenand_read_oob_nolock - [MTD Interface] OneNAND read out-of-band
- * @param mtd MTD device structure
- * @param from offset to read from
- * @param ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
*
* OneNAND read out-of-band data from the spare area
*/
@@ -1430,9 +1430,9 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,

/**
* onenand_read_oob - [MTD Interface] Read main and/or out-of-band
- * @param mtd: MTD device structure
- * @param from: offset to read from
- * @param ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure

* Read main and/or out-of-band
*/
@@ -1466,8 +1466,8 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from,

/**
* onenand_bbt_wait - [DEFAULT] wait until the command is done
- * @param mtd MTD device structure
- * @param state state to select the max. timeout value
+ * @mtd: MTD device structure
+ * @state: state to select the max. timeout value
*
* Wait for command done.
*/
@@ -1517,9 +1517,9 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state)

/**
* onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan
- * @param mtd MTD device structure
- * @param from offset to read from
- * @param ops oob operation description structure
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
*
* OneNAND read out-of-band data from the spare area for bbt scan
*/
@@ -1594,9 +1594,9 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
/**
* onenand_verify_oob - [GENERIC] verify the oob contents after a write
- * @param mtd MTD device structure
- * @param buf the databuffer to verify
- * @param to offset to read from
+ * @mtd: MTD device structure
+ * @buf: the databuffer to verify
+ * @to: offset to read from
*/
static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to)
{
@@ -1622,10 +1622,10 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to

/**
* onenand_verify - [GENERIC] verify the chip contents after a write
- * @param mtd MTD device structure
- * @param buf the databuffer to verify
- * @param addr offset to read from
- * @param len number of bytes to read and compare
+ * @mtd: MTD device structure
+ * @buf: the databuffer to verify
+ * @addr: offset to read from
+ * @len: number of bytes to read and compare
*/
static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr, size_t len)
{
@@ -1684,11 +1684,11 @@ static void onenand_panic_wait(struct mtd_info *mtd)

/**
* onenand_panic_write - [MTD Interface] write buffer to FLASH in a panic context
- * @param mtd MTD device structure
- * @param to offset to write to
- * @param len number of bytes to write
- * @param retlen pointer to variable to store the number of written bytes
- * @param buf the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
*
* Write with ECC
*/
@@ -1762,11 +1762,11 @@ static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len,

/**
* onenand_fill_auto_oob - [INTERN] oob auto-placement transfer
- * @param mtd MTD device structure
- * @param oob_buf oob buffer
- * @param buf source address
- * @param column oob offset to write to
- * @param thislen oob length to write
+ * @mtd: MTD device structure
+ * @oob_buf: oob buffer
+ * @buf: source address
+ * @column: oob offset to write to
+ * @thislen: oob length to write
*/
static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
const u_char *buf, int column, int thislen)
@@ -1776,9 +1776,9 @@ static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,

/**
* onenand_write_ops_nolock - [OneNAND Interface] write main and/or out-of-band
- * @param mtd MTD device structure
- * @param to offset to write to
- * @param ops oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
*
* Write main and/or oob with ECC
*/
@@ -1957,12 +1957,12 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,

/**
* onenand_write_oob_nolock - [INTERN] OneNAND write out-of-band
- * @param mtd MTD device structure
- * @param to offset to write to
- * @param len number of bytes to write
- * @param retlen pointer to variable to store the number of written bytes
- * @param buf the data to write
- * @param mode operation mode
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
+ * @mode: operation mode
*
* OneNAND write out-of-band
*/
@@ -2070,9 +2070,9 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,

/**
* onenand_write_oob - [MTD Interface] NAND write data and/or out-of-band
- * @param mtd: MTD device structure
- * @param to: offset to write
- * @param ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write
+ * @ops: oob operation description structure
*/
static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
@@ -2101,9 +2101,9 @@ static int onenand_write_oob(struct mtd_info *mtd, loff_t to,

/**
* onenand_block_isbad_nolock - [GENERIC] Check if a block is marked bad
- * @param mtd MTD device structure
- * @param ofs offset from device start
- * @param allowbbt 1, if its allowed to access the bbt area
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @allowbbt: 1, if its allowed to access the bbt area
*
* Check, if the block is bad. Either by reading the bad block table or
* calling of the scan function.
@@ -2144,9 +2144,9 @@ static int onenand_multiblock_erase_verify(struct mtd_info *mtd,

/**
* onenand_multiblock_erase - [INTERN] erase block(s) using multiblock erase
- * @param mtd MTD device structure
- * @param instr erase instruction
- * @param region erase region
+ * @mtd: MTD device structure
+ * @instr: erase instruction
+ * @region: erase region
*
* Erase one or more blocks up to 64 block at a time
*/
@@ -2254,10 +2254,10 @@ static int onenand_multiblock_erase(struct mtd_info *mtd,

/**
* onenand_block_by_block_erase - [INTERN] erase block(s) using regular erase
- * @param mtd MTD device structure
- * @param instr erase instruction
- * @param region erase region
- * @param block_size erase block size
+ * @mtd: MTD device structure
+ * @instr: erase instruction
+ * @region: erase region
+ * @block_size: erase block size
*
* Erase one or more blocks one block at a time
*/
@@ -2326,8 +2326,8 @@ static int onenand_block_by_block_erase(struct mtd_info *mtd,

/**
* onenand_erase - [MTD Interface] erase block(s)
- * @param mtd MTD device structure
- * @param instr erase instruction
+ * @mtd: MTD device structure
+ * @instr: erase instruction
*
* Erase one or more blocks
*/
@@ -2391,7 +2391,7 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)

/**
* onenand_sync - [MTD Interface] sync
- * @param mtd MTD device structure
+ * @mtd: MTD device structure
*
* Sync is actually a wait for chip ready function
*/
@@ -2408,8 +2408,8 @@ static void onenand_sync(struct mtd_info *mtd)

/**
* onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
- * @param mtd MTD device structure
- * @param ofs offset relative to mtd start
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
*
* Check whether the block is bad
*/
@@ -2425,8 +2425,8 @@ static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)

/**
* onenand_default_block_markbad - [DEFAULT] mark a block bad
- * @param mtd MTD device structure
- * @param ofs offset from device start
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
*
* This is the default implementation, which can be overridden by
* a hardware specific driver.
@@ -2460,8 +2460,8 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)

/**
* onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
- * @param mtd MTD device structure
- * @param ofs offset relative to mtd start
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
*
* Mark the block as bad
*/
@@ -2486,10 +2486,10 @@ static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)

/**
* onenand_do_lock_cmd - [OneNAND Interface] Lock or unlock block(s)
- * @param mtd MTD device structure
- * @param ofs offset relative to mtd start
- * @param len number of bytes to lock or unlock
- * @param cmd lock or unlock command
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
+ * @len: number of bytes to lock or unlock
+ * @cmd: lock or unlock command
*
* Lock or unlock one or more blocks
*/
@@ -2566,9 +2566,9 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int

/**
* onenand_lock - [MTD Interface] Lock block(s)
- * @param mtd MTD device structure
- * @param ofs offset relative to mtd start
- * @param len number of bytes to unlock
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
+ * @len: number of bytes to unlock
*
* Lock one or more blocks
*/
@@ -2584,9 +2584,9 @@ static int onenand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)

/**
* onenand_unlock - [MTD Interface] Unlock block(s)
- * @param mtd MTD device structure
- * @param ofs offset relative to mtd start
- * @param len number of bytes to unlock
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
+ * @len: number of bytes to unlock
*
* Unlock one or more blocks
*/
@@ -2602,7 +2602,7 @@ static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)

/**
* onenand_check_lock_status - [OneNAND Interface] Check lock status
- * @param this onenand chip data structure
+ * @this: onenand chip data structure
*
* Check lock status
*/
@@ -2636,7 +2636,7 @@ static int onenand_check_lock_status(struct onenand_chip *this)

/**
* onenand_unlock_all - [OneNAND Interface] unlock all blocks
- * @param mtd MTD device structure
+ * @mtd: MTD device structure
*
* Unlock all blocks
*/
@@ -2683,10 +2683,10 @@ static void onenand_unlock_all(struct mtd_info *mtd)

/**
* onenand_otp_command - Send OTP specific command to OneNAND device
- * @param mtd MTD device structure
- * @param cmd the command to be sent
- * @param addr offset to read from or write to
- * @param len number of bytes to read or write
+ * @mtd: MTD device structure
+ * @cmd: the command to be sent
+ * @addr: offset to read from or write to
+ * @len: number of bytes to read or write
*/
static int onenand_otp_command(struct mtd_info *mtd, int cmd, loff_t addr,
size_t len)
@@ -2758,11 +2758,11 @@ static int onenand_otp_command(struct mtd_info *mtd, int cmd, loff_t addr,

/**
* onenand_otp_write_oob_nolock - [INTERN] OneNAND write out-of-band, specific to OTP
- * @param mtd MTD device structure
- * @param to offset to write to
- * @param len number of bytes to write
- * @param retlen pointer to variable to store the number of written bytes
- * @param buf the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
*
* OneNAND write out-of-band only for OTP
*/
@@ -2889,11 +2889,11 @@ typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len,

/**
* do_otp_read - [DEFAULT] Read OTP block area
- * @param mtd MTD device structure
- * @param from The offset to read
- * @param len number of bytes to read
- * @param retlen pointer to variable to store the number of readbytes
- * @param buf the databuffer to put/get data
+ * @mtd: MTD device structure
+ * @from: The offset to read
+ * @len: number of bytes to read
+ * @retlen: pointer to variable to store the number of readbytes
+ * @buf: the databuffer to put/get data
*
* Read OTP block area.
*/
@@ -2926,11 +2926,11 @@ static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len,

/**
* do_otp_write - [DEFAULT] Write OTP block area
- * @param mtd MTD device structure
- * @param to The offset to write
- * @param len number of bytes to write
- * @param retlen pointer to variable to store the number of write bytes
- * @param buf the databuffer to put/get data
+ * @mtd: MTD device structure
+ * @to: The offset to write
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of write bytes
+ * @buf: the databuffer to put/get data
*
* Write OTP block area.
*/
@@ -2970,11 +2970,11 @@ static int do_otp_write(struct mtd_info *mtd, loff_t to, size_t len,

/**
* do_otp_lock - [DEFAULT] Lock OTP block area
- * @param mtd MTD device structure
- * @param from The offset to lock
- * @param len number of bytes to lock
- * @param retlen pointer to variable to store the number of lock bytes
- * @param buf the databuffer to put/get data
+ * @mtd: MTD device structure
+ * @from: The offset to lock
+ * @len: number of bytes to lock
+ * @retlen: pointer to variable to store the number of lock bytes
+ * @buf: the databuffer to put/get data
*
* Lock OTP block area.
*/
@@ -3018,13 +3018,13 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,

/**
* onenand_otp_walk - [DEFAULT] Handle OTP operation
- * @param mtd MTD device structure
- * @param from The offset to read/write
- * @param len number of bytes to read/write
- * @param retlen pointer to variable to store the number of read bytes
- * @param buf the databuffer to put/get data
- * @param action do given action
- * @param mode specify user and factory
+ * @mtd: MTD device structure
+ * @from: The offset to read/write
+ * @len: number of bytes to read/write
+ * @retlen: pointer to variable to store the number of read bytes
+ * @buf: the databuffer to put/get data
+ * @action: do given action
+ * @mode: specify user and factory
*
* Handle OTP operation.
*/
@@ -3099,10 +3099,10 @@ static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,

/**
* onenand_get_fact_prot_info - [MTD Interface] Read factory OTP info
- * @param mtd MTD device structure
- * @param len number of bytes to read
- * @param retlen pointer to variable to store the number of read bytes
- * @param buf the databuffer to put/get data
+ * @mtd: MTD device structure
+ * @len: number of bytes to read
+ * @retlen: pointer to variable to store the number of read bytes
+ * @buf: the databuffer to put/get data
*
* Read factory OTP info.
*/
@@ -3115,11 +3115,11 @@ static int onenand_get_fact_prot_info(struct mtd_info *mtd, size_t len,

/**
* onenand_read_fact_prot_reg - [MTD Interface] Read factory OTP area
- * @param mtd MTD device structure
- * @param from The offset to read
- * @param len number of bytes to read
- * @param retlen pointer to variable to store the number of read bytes
- * @param buf the databuffer to put/get data
+ * @mtd: MTD device structure
+ * @from: The offset to read
+ * @len: number of bytes to read
+ * @retlen: pointer to variable to store the number of read bytes
+ * @buf: the databuffer to put/get data
*
* Read factory OTP area.
*/
@@ -3131,10 +3131,10 @@ static int onenand_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,

/**
* onenand_get_user_prot_info - [MTD Interface] Read user OTP info
- * @param mtd MTD device structure
- * @param retlen pointer to variable to store the number of read bytes
- * @param len number of bytes to read
- * @param buf the databuffer to put/get data
+ * @mtd: MTD device structure
+ * @retlen: pointer to variable to store the number of read bytes
+ * @len: number of bytes to read
+ * @buf: the databuffer to put/get data
*
* Read user OTP info.
*/
@@ -3147,11 +3147,11 @@ static int onenand_get_user_prot_info(struct mtd_info *mtd, size_t len,

/**
* onenand_read_user_prot_reg - [MTD Interface] Read user OTP area
- * @param mtd MTD device structure
- * @param from The offset to read
- * @param len number of bytes to read
- * @param retlen pointer to variable to store the number of read bytes
- * @param buf the databuffer to put/get data
+ * @mtd: MTD device structure
+ * @from: The offset to read
+ * @len: number of bytes to read
+ * @retlen: pointer to variable to store the number of read bytes
+ * @buf: the databuffer to put/get data
*
* Read user OTP area.
*/
@@ -3163,11 +3163,11 @@ static int onenand_read_user_prot_reg(struct mtd_info *mtd, loff_t from,

/**
* onenand_write_user_prot_reg - [MTD Interface] Write user OTP area
- * @param mtd MTD device structure
- * @param from The offset to write
- * @param len number of bytes to write
- * @param retlen pointer to variable to store the number of write bytes
- * @param buf the databuffer to put/get data
+ * @mtd: MTD device structure
+ * @from: The offset to write
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of write bytes
+ * @buf: the databuffer to put/get data
*
* Write user OTP area.
*/
@@ -3179,9 +3179,9 @@ static int onenand_write_user_prot_reg(struct mtd_info *mtd, loff_t from,

/**
* onenand_lock_user_prot_reg - [MTD Interface] Lock user OTP area
- * @param mtd MTD device structure
- * @param from The offset to lock
- * @param len number of bytes to unlock
+ * @mtd: MTD device structure
+ * @from: The offset to lock
+ * @len: number of bytes to unlock
*
* Write lock mark on spare area in page 0 in OTP block
*/
@@ -3234,7 +3234,7 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,

/**
* onenand_check_features - Check and set OneNAND features
- * @param mtd MTD data structure
+ * @mtd: MTD data structure
*
* Check and set OneNAND features
* - lock scheme
@@ -3324,8 +3324,8 @@ static void onenand_check_features(struct mtd_info *mtd)

/**
* onenand_print_device_info - Print device & version ID
- * @param device device ID
- * @param version version ID
+ * @device: device ID
+ * @version: version ID
*
* Print device & version ID
*/
@@ -3355,7 +3355,7 @@ static const struct onenand_manufacturers onenand_manuf_ids[] = {

/**
* onenand_check_maf - Check manufacturer ID
- * @param manuf manufacturer ID
+ * @manuf: manufacturer ID
*
* Check manufacturer ID
*/
@@ -3381,7 +3381,7 @@ static int onenand_check_maf(int manuf)

/**
* flexonenand_get_boundary - Reads the SLC boundary
-* @param onenand_info - onenand info structure
+* @onenand_info: - onenand info structure
**/
static int flexonenand_get_boundary(struct mtd_info *mtd)
{
@@ -3422,7 +3422,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd)
/**
* flexonenand_get_size - Fill up fields in onenand_chip and mtd_info
* boundary[], diesize[], mtd->size, mtd->erasesize
- * @param mtd - MTD device structure
+ * @mtd: - MTD device structure
*/
static void flexonenand_get_size(struct mtd_info *mtd)
{
@@ -3493,9 +3493,9 @@ static void flexonenand_get_size(struct mtd_info *mtd)

/**
* flexonenand_check_blocks_erased - Check if blocks are erased
- * @param mtd_info - mtd info structure
- * @param start - first erase block to check
- * @param end - last erase block to check
+ * @mtd_info: - mtd info structure
+ * @start: - first erase block to check
+ * @end: - last erase block to check
*
* Converting an unerased block from MLC to SLC
* causes byte values to change. Since both data and its ECC
@@ -3550,7 +3550,7 @@ static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int

/**
* flexonenand_set_boundary - Writes the SLC boundary
- * @param mtd - mtd info structure
+ * @mtd: - mtd info structure
*/
static int flexonenand_set_boundary(struct mtd_info *mtd, int die,
int boundary, int lock)
@@ -3640,7 +3640,7 @@ static int flexonenand_set_boundary(struct mtd_info *mtd, int die,

/**
* onenand_chip_probe - [OneNAND Interface] The generic chip probe
- * @param mtd MTD device structure
+ * @mtd: MTD device structure
*
* OneNAND detection method:
* Compare the values from command with ones from register
@@ -3688,7 +3688,7 @@ static int onenand_chip_probe(struct mtd_info *mtd)

/**
* onenand_probe - [OneNAND Interface] Probe the OneNAND device
- * @param mtd MTD device structure
+ * @mtd: MTD device structure
*/
static int onenand_probe(struct mtd_info *mtd)
{
@@ -3783,7 +3783,7 @@ static int onenand_probe(struct mtd_info *mtd)

/**
* onenand_suspend - [MTD Interface] Suspend the OneNAND flash
- * @param mtd MTD device structure
+ * @mtd: MTD device structure
*/
static int onenand_suspend(struct mtd_info *mtd)
{
@@ -3792,7 +3792,7 @@ static int onenand_suspend(struct mtd_info *mtd)

/**
* onenand_resume - [MTD Interface] Resume the OneNAND flash
- * @param mtd MTD device structure
+ * @mtd: MTD device structure
*/
static void onenand_resume(struct mtd_info *mtd)
{
@@ -3807,8 +3807,8 @@ static void onenand_resume(struct mtd_info *mtd)

/**
* onenand_scan - [OneNAND Interface] Scan for the OneNAND device
- * @param mtd MTD device structure
- * @param maxchips Number of chips to scan for
+ * @mtd: MTD device structure
+ * @maxchips: Number of chips to scan for
*
* This fills out all the not initialized function pointers
* with the defaults.
@@ -3985,7 +3985,7 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)

/**
* onenand_release - [OneNAND Interface] Free resources held by the OneNAND device
- * @param mtd MTD device structure
+ * @mtd: MTD device structure
*/
void onenand_release(struct mtd_info *mtd)
{
--
2.25.1
\
 
 \ /
  Last update: 2020-11-02 12:54    [W:0.507 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site