lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 01/13] octeontx2-af: Modify default KEX profile to extract TX packet fields
Date
From: Stanislaw Kardach <skardach@marvell.com>

The current default Key Extraction(KEX) profile can only use RX
packet fields while generating the MCAM search key. The profile
can't be used for matching TX packet fields. This patch modifies
the default KEX profile to add support for extracting TX packet
fields into MCAM search key. Enabled Tx KPU packet parsing by
configuring TX PKIND in tx_parse_cfg.

Also modified the default KEX profile to extract VLAN TCI from
the LB_PTR and exact byte offset of VLAN header. The NPC KPU
parser was modified to point LB_PTR to the starting byte offset
of VLAN header which points to the tpid field.

Signed-off-by: Stanislaw Kardach <skardach@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
---
.../ethernet/marvell/octeontx2/af/npc_profile.h | 71 ++++++++++++++++++++--
.../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 6 ++
2 files changed, 72 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h b/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h
index 199448610e3e..c5b13385c81d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h
@@ -13386,8 +13386,8 @@ static struct npc_mcam_kex npc_mkex_default = {
.kpu_version = NPC_KPU_PROFILE_VER,
.keyx_cfg = {
/* nibble: LA..LE (ltype only) + Channel */
- [NIX_INTF_RX] = ((u64)NPC_MCAM_KEY_X2 << 32) | 0x49247,
- [NIX_INTF_TX] = ((u64)NPC_MCAM_KEY_X2 << 32) | ((1ULL << 19) - 1),
+ [NIX_INTF_RX] = ((u64)NPC_MCAM_KEY_X2 << 32) | 0x249207,
+ [NIX_INTF_TX] = ((u64)NPC_MCAM_KEY_X2 << 32) | 0x249200,
},
.intf_lid_lt_ld = {
/* Default RX MCAM KEX profile */
@@ -13405,12 +13405,14 @@ static struct npc_mcam_kex npc_mkex_default = {
/* Layer B: Single VLAN (CTAG) */
/* CTAG VLAN[2..3] + Ethertype, 4 bytes, KW0[63:32] */
[NPC_LT_LB_CTAG] = {
- KEX_LD_CFG(0x03, 0x0, 0x1, 0x0, 0x4),
+ KEX_LD_CFG(0x03, 0x2, 0x1, 0x0, 0x4),
},
/* Layer B: Stacked VLAN (STAG|QinQ) */
[NPC_LT_LB_STAG_QINQ] = {
- /* CTAG VLAN[2..3] + Ethertype, 4 bytes, KW0[63:32] */
- KEX_LD_CFG(0x03, 0x4, 0x1, 0x0, 0x4),
+ /* Outer VLAN: 2 bytes, KW0[63:48] */
+ KEX_LD_CFG(0x01, 0x2, 0x1, 0x0, 0x6),
+ /* Ethertype: 2 bytes, KW0[47:32] */
+ KEX_LD_CFG(0x01, 0x8, 0x1, 0x0, 0x4),
},
[NPC_LT_LB_FDSA] = {
/* SWITCH PORT: 1 byte, KW0[63:48] */
@@ -13450,6 +13452,65 @@ static struct npc_mcam_kex npc_mkex_default = {
},
},
},
+
+ /* Default TX MCAM KEX profile */
+ [NIX_INTF_TX] = {
+ [NPC_LID_LA] = {
+ /* Layer A: Ethernet: */
+ [NPC_LT_LA_IH_NIX_ETHER] = {
+ /* PF_FUNC: 2B , KW0 [47:32] */
+ KEX_LD_CFG(0x01, 0x0, 0x1, 0x0, 0x4),
+ /* DMAC: 6 bytes, KW1[63:16] */
+ KEX_LD_CFG(0x05, 0x8, 0x1, 0x0, 0xa),
+ },
+ },
+ [NPC_LID_LB] = {
+ /* Layer B: Single VLAN (CTAG) */
+ [NPC_LT_LB_CTAG] = {
+ /* CTAG VLAN[2..3] KW0[63:48] */
+ KEX_LD_CFG(0x01, 0x2, 0x1, 0x0, 0x6),
+ /* CTAG VLAN[2..3] KW1[15:0] */
+ KEX_LD_CFG(0x01, 0x4, 0x1, 0x0, 0x8),
+ },
+ /* Layer B: Stacked VLAN (STAG|QinQ) */
+ [NPC_LT_LB_STAG_QINQ] = {
+ /* Outer VLAN: 2 bytes, KW0[63:48] */
+ KEX_LD_CFG(0x01, 0x2, 0x1, 0x0, 0x6),
+ /* Outer VLAN: 2 Bytes, KW1[15:0] */
+ KEX_LD_CFG(0x01, 0x8, 0x1, 0x0, 0x8),
+ },
+ },
+ [NPC_LID_LC] = {
+ /* Layer C: IPv4 */
+ [NPC_LT_LC_IP] = {
+ /* SIP+DIP: 8 bytes, KW2[63:0] */
+ KEX_LD_CFG(0x07, 0xc, 0x1, 0x0, 0x10),
+ /* TOS: 1 byte, KW1[63:56] */
+ KEX_LD_CFG(0x0, 0x1, 0x1, 0x0, 0xf),
+ },
+ /* Layer C: IPv6 */
+ [NPC_LT_LC_IP6] = {
+ /* Everything up to SADDR: 8 bytes, KW2[63:0] */
+ KEX_LD_CFG(0x07, 0x0, 0x1, 0x0, 0x10),
+ },
+ },
+ [NPC_LID_LD] = {
+ /* Layer D:UDP */
+ [NPC_LT_LD_UDP] = {
+ /* SPORT: 2 bytes, KW3[15:0] */
+ KEX_LD_CFG(0x1, 0x0, 0x1, 0x0, 0x18),
+ /* DPORT: 2 bytes, KW3[31:16] */
+ KEX_LD_CFG(0x1, 0x2, 0x1, 0x0, 0x1a),
+ },
+ /* Layer D:TCP */
+ [NPC_LT_LD_TCP] = {
+ /* SPORT: 2 bytes, KW3[15:0] */
+ KEX_LD_CFG(0x1, 0x0, 0x1, 0x0, 0x18),
+ /* DPORT: 2 bytes, KW3[31:16] */
+ KEX_LD_CFG(0x1, 0x2, 0x1, 0x0, 0x1a),
+ },
+ },
+ },
},
};

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index 8bac1dd3a1c2..8c11abdbd9d1 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -57,6 +57,8 @@ enum nix_makr_fmt_indexes {
NIX_MARK_CFG_MAX,
};

+#define NIX_TX_PKIND 63ULL
+
/* For now considering MC resources needed for broadcast
* pkt replication only. i.e 256 HWVFs + 12 PFs.
*/
@@ -1182,6 +1184,10 @@ int rvu_mbox_handler_nix_lf_alloc(struct rvu *rvu,
/* Config Rx pkt length, csum checks and apad enable / disable */
rvu_write64(rvu, blkaddr, NIX_AF_LFX_RX_CFG(nixlf), req->rx_cfg);

+ /* Configure pkind for TX parse config, 63 from npc_profile */
+ cfg = NIX_TX_PKIND;
+ rvu_write64(rvu, blkaddr, NIX_AF_LFX_TX_PARSE_CFG(nixlf), cfg);
+
intf = is_afvf(pcifunc) ? NIX_INTF_TYPE_LBK : NIX_INTF_TYPE_CGX;
err = nix_interface_init(rvu, pcifunc, intf, nixlf);
if (err)
--
2.16.5
\
 
 \ /
  Last update: 2020-11-02 07:14    [W:0.078 / U:6.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site