lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 09/22] arm64: dts: allwinner: h6: Add HDMI audio node
Hi Maxime,

On Mon, 2 Nov 2020 at 11:21, Maxime Ripard <maxime@cerno.tech> wrote:
>
> On Sun, Nov 01, 2020 at 04:27:05PM +0100, Clément Péron wrote:
> > On Wed, 30 Sep 2020 at 12:19, Maxime Ripard <maxime@cerno.tech> wrote:
> > >
> > > On Mon, Sep 28, 2020 at 04:27:42PM +0200, Clément Péron wrote:
> > > > On Mon, 28 Sep 2020 at 10:43, Maxime Ripard <maxime@cerno.tech> wrote:
> > > > >
> > > > > On Mon, Sep 21, 2020 at 08:37:09PM +0200, Jernej Škrabec wrote:
> > > > > > Dne ponedeljek, 21. september 2020 ob 19:23:49 CEST je Clément Péron
> > > > > > napisal(a):
> > > > > > > Hi Maxime,
> > > > > > >
> > > > > > > On Mon, 21 Sep 2020 at 15:59, Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > > > >
> > > > > > > > On Mon, Sep 21, 2020 at 12:27:18PM +0200, Clément Péron wrote:
> > > > > > > > > From: Jernej Skrabec <jernej.skrabec@siol.net>
> > > > > > > > >
> > > > > > > > > Add a simple-soundcard to link audio between HDMI and I2S.
> > > > > > > > >
> > > > > > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > > > > > > > > Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> > > > > > > > > Signed-off-by: Clément Péron <peron.clem@gmail.com>
> > > > > > > > > ---
> > > > > > > > > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 ++++++++++++++++++++
> > > > > > > > > 1 file changed, 33 insertions(+)
> > > > > > > > >
> > > > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/
> > > > > > boot/dts/allwinner/sun50i-h6.dtsi
> > > > > > > > > index 28c77d6872f6..a8853ee7885a 100644
> > > > > > > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > > > > > > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > > > > > > > > @@ -67,6 +67,25 @@ de: display-engine {
> > > > > > > > > status = "disabled";
> > > > > > > > > };
> > > > > > > > >
> > > > > > > > > + hdmi_sound: hdmi-sound {
> > > > > > > > > + compatible = "simple-audio-card";
> > > > > > > > > + simple-audio-card,format = "i2s";
> > > > > > > > > + simple-audio-card,name = "sun50i-h6-hdmi";
> > > > > > > > > + simple-audio-card,mclk-fs = <128>;
> > > > > > > > > + simple-audio-card,frame-inversion;
> > > > > > > > > + status = "disabled";
> > > > > > > > > +
> > > > > > > > > + simple-audio-card,codec {
> > > > > > > > > + sound-dai = <&hdmi>;
> > > > > > > > > + };
> > > > > > > > > +
> > > > > > > > > + simple-audio-card,cpu {
> > > > > > > > > + sound-dai = <&i2s1>;
> > > > > > > > > + dai-tdm-slot-num = <2>;
> > > > > > > > > + dai-tdm-slot-width = <32>;
> > > > > > > >
> > > > > > > > It looks weird to have both some TDM setup here, and yet the format in
> > > > > > > > i2s?
> >
> >
> > I was looking at sound documentation regarding how I can properly
> > write the multi-lane I2S support.
> > And I think we made a wrong interpretation here.
> >
> > TDM slot-num and slot-width are not referencing the format called PCM
> > or DSP_A / DSP_B.
> > But really the physical time division representation of a format.
> >
> > For example Amlogic do the following representation for Multi-lane I2S:
> >
> > dai-link-7 {
> > sound-dai = <&tdmif_b>;
> > dai-format = "i2s";
> > dai-tdm-slot-tx-mask-0 = <1 1>;
> > dai-tdm-slot-tx-mask-1 = <1 1>;
> > dai-tdm-slot-tx-mask-2 = <1 1>;
> > dai-tdm-slot-tx-mask-3 = <1 1>;
> > mclk-fs = <256>;
> >
> > codec {
> > sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> > };
> > };
> >
> > So i think for 2 channels HDMI using the simple sound card with TDM
> > property is not a hack but the correct way to represent it.
> >
> > Do you agree ?
> >
> > If so, can I resend the simple sound card for HDMI audio ?
>
> I mean, it's not less weird :)
>
> And like I said before we still have the option to write a card driver
> ourselves that doesn't take anything from the DT beside the phandle of
> the i2s controller and the HDMI controller.
>
> If it's a fixed configuration, I'm not sure why we bother trying to make
> it dynamic in the DT.

Ok I see what you mean here, as the link is hardcoded in the SoC it's
a better representation to hardcode it in the sound card driver than
having it dynamically represented in each board device-tree.

Sounds correct for me,
Thanks :)

>
> Maxime

\
 
 \ /
  Last update: 2020-11-02 12:20    [W:0.073 / U:1.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site