lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 5/6] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC
On Fri, Oct 30, 2020 at 11:43:24PM +0000, Matteo Scordino wrote:
> The Elimo Engineering Initium is an Open Source Hardware Single Board
> Computer based on the Elimo Impetus SoM.
>
> It is meant as the first development platform for the Impetus, providing
> convenient access to the peripherals on the Impetus.
>
> It provides:
> USB-C power input
> UART-to-USB bridge on the USB-C connector, connected to UART1
> USB-A connector for USB2.0 (Host, Device, OTG)
> Audio Line In/Out
> Pin header to access all signals on the M2 connector of the SoM
>
> Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/sun8i-s3-elimo-initium.dts | 28 ++++++++++++++++++++
> 2 files changed, 29 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4f0adfead547..dcfb8d39c267 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1210,6 +1210,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> sun8i-r40-bananapi-m2-ultra.dtb \
> sun8i-s3-lichee-zero-plus.dtb \
> sun8i-s3-pinecube.dtb \
> + sun8i-s3-elimo-initium.dtb \

This should be sorted as well

> sun8i-t3-cqa3t-bv3.dtb \
> sun8i-v3s-licheepi-zero.dtb \
> sun8i-v3s-licheepi-zero-dock.dtb \
> diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
> new file mode 100644
> index 000000000000..7677ddc07bf9
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
> @@ -0,0 +1,28 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
> + */
> +
> +/dts-v1/;
> +#include "sun8i-s3-elimo-impetus.dtsi"
> +
> +/ {
> + model = "Elimo Initium";
> + compatible = "elimo,initium", "elimo,impetus", "sochip,s3",
> + "allwinner,sun8i-v3";
You should indent that properly

> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};

It's already in the DTSI, there's no need to duplicate it here

Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-11-02 11:07    [W:0.197 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site