lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.9 11/35] ARM: dts: mmp3: Add power domain for the camera
Date
From: Lubomir Rintel <lkundrak@v3.sk>

[ Upstream commit 202f8e5c4975a95babf3bcdfb2c18952f06b030a ]

The camera interfaces on MMP3 are on a separate power island that needs
to be turned on for them to operate and, ideally, turned off when the
cameras are not in use.

This hooks the power island with the camera interfaces in the device
tree.

Link: https://lore.kernel.org/r/20200925234805.228251-2-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/mmp3.dtsi | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
index cc4efd0efabd2..4ae630d37d094 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/mmp3.dtsi
@@ -296,6 +296,7 @@ camera0: camera@d420a000 {
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&soc_clocks MMP2_CLK_CCIC0>;
clock-names = "axi";
+ power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
#clock-cells = <0>;
clock-output-names = "mclk";
status = "disabled";
@@ -307,6 +308,7 @@ camera1: camera@d420a800 {
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&soc_clocks MMP2_CLK_CCIC1>;
clock-names = "axi";
+ power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
#clock-cells = <0>;
clock-output-names = "mclk";
status = "disabled";
--
2.27.0
\
 
 \ /
  Last update: 2020-11-03 02:28    [W:0.410 / U:7.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site