lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform
On 00:00-20201103, Faiz Abbas wrote:
> Add configs to help enable regulators that supply power to the SD card
> on TI's J721e platform. These regulators are controlled by either
> SoC gpios or gpios over i2c expander.
>
> Acked-by: Tero Kristo <t-kristo@ti.com>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> ---
>
> Changes in v2: Squashed changes into a single patch
>
> v1: https://lore.kernel.org/linux-arm-kernel/20201002164535.9920-1-faiz_abbas@ti.com/


Faiz, See:
https://lore.kernel.org/linux-arm-kernel/CAK8P3a2dxGV4ussfC16XN98xeSwsKum=Hu8_GJ+E3ZS=wu8oYw@mail.gmail.com/

Do you mind indicating size delta introduced by this change since this
is going to impact a lot of folks?

>
> arch/arm64/configs/defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 5cfe3cf6f2ac..bbf42faaddfe 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -438,6 +438,7 @@ CONFIG_I2C_IMX=y
> CONFIG_I2C_IMX_LPI2C=y
> CONFIG_I2C_MESON=y
> CONFIG_I2C_MV64XXX=y
> +CONFIG_I2C_OMAP=y
> CONFIG_I2C_OWL=y
> CONFIG_I2C_PXA=y
> CONFIG_I2C_QCOM_CCI=m
> @@ -497,6 +498,7 @@ CONFIG_PINCTRL_SDM845=y
> CONFIG_PINCTRL_SM8150=y
> CONFIG_PINCTRL_SM8250=y
> CONFIG_GPIO_ALTERA=m
> +CONFIG_GPIO_DAVINCI=y
> CONFIG_GPIO_DWAPB=y
> CONFIG_GPIO_MB86S7X=y
> CONFIG_GPIO_MPC8XXX=y
> --
> 2.17.1
>

--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D

\
 
 \ /
  Last update: 2020-11-02 20:35    [W:0.053 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site