lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform
Date
Add configs to help enable regulators that supply power to the SD card
on TI's J721e platform. These regulators are controlled by either
SoC gpios or gpios over i2c expander.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---

Changes in v2: Squashed changes into a single patch

v1: https://lore.kernel.org/linux-arm-kernel/20201002164535.9920-1-faiz_abbas@ti.com/

arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5cfe3cf6f2ac..bbf42faaddfe 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -438,6 +438,7 @@ CONFIG_I2C_IMX=y
CONFIG_I2C_IMX_LPI2C=y
CONFIG_I2C_MESON=y
CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_OMAP=y
CONFIG_I2C_OWL=y
CONFIG_I2C_PXA=y
CONFIG_I2C_QCOM_CCI=m
@@ -497,6 +498,7 @@ CONFIG_PINCTRL_SDM845=y
CONFIG_PINCTRL_SM8150=y
CONFIG_PINCTRL_SM8250=y
CONFIG_GPIO_ALTERA=m
+CONFIG_GPIO_DAVINCI=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MPC8XXX=y
--
2.17.1
\
 
 \ /
  Last update: 2020-11-02 19:30    [W:0.036 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site