[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v6] can: usb: etas_es58X: add support for ETAS ES58X CAN USB interfaces
On Mon. 16 Nov 2020 at 03:55, Marc Kleine-Budde wrote:
> On 11/14/20 4:22 PM, Vincent Mailhol wrote:
> > This driver supports the ES581.4, ES582.1 and ES584.1 interfaces from
> > ETAS GmbH (
> >
> > Co-developed-by: Arunachalam Santhanam <>
> > Signed-off-by: Arunachalam Santhanam <>
> > Signed-off-by: Vincent Mailhol <>
> The driver fails to compile with CONFIG_SYSFS switched off
> CC [M] drivers/net/can/usb/etas_es58x/es58x_core.o
> drivers/net/can/usb/etas_es58x/es58x_core.c: In function ‘es58x_init_netdev’:
> drivers/net/can/usb/etas_es58x/es58x_core.c:2380:32: error: ‘struct netdev_queue’ has no member named ‘dql’
> 2380 | netdev_get_tx_queue(netdev, 0)->dql.min_limit =
> | ^~

Thanks, nice catch!
CONFIG_SYSFS is an expert setting, I totally missed that one. Took me
actually a couple of minutes navigating in the menuconfig to find how
to remove the option.

The root cause is actually on CONFIG_BQL (which depends on

Will send a v7 patch right after.

Out of curiosity, how did you find this? Did you find it during a code
review or did you just happen to have a .config with CONFIG_SYSFS

Yours sincerely,
Vincent Mailhol

 \ /
  Last update: 2020-11-16 15:46    [W:0.081 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site