lkml.org 
[lkml]   [2020]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv1 0/4] Extend FPGA manager and region drivers for
On Thu, Nov 12, 2020 at 12:06:39PM -0600, richard.gong@linux.intel.com wrote:
> From: Richard Gong <richard.gong@intel.com>
>
> The customer wants to verify that a FPGA bitstream can be started properly
> before saving the bitstream to the QSPI flash memory.
>
> The customer sends the bitstream via FPGA framework and overlay, the
> firmware will authenticate the bitstream but not program the bitstream to
> device. If the authentication passes, the bitstream will be programmed into
> QSPI flash and will be expected to boot without issues.

So when we have successfully reprogramed region with the
FPGA_MGR_BITSTREM_AUTHENTICATION flag, the bitstream in QSPI flash is
updated but not activated, we need an FPGA reboot to activate it, is it?

Thanks,
Yilun

>
> Extend FPGA manager and region drivers to support the bitstream
> authentication feature.
>
> Richard Gong (4):
> fpga: fpga-mgr: add FPGA_MGR_BITSTREM_AUTHENTICATION flag
> fpga: of-fpga-region: add authenticate-fpga-config property
> dt-bindings: fpga: add authenticate-fpga-config property
> fpga: stratix10-soc: entend driver for bitstream authentication
>
> Documentation/devicetree/bindings/fpga/fpga-region.txt | 1 +
> drivers/fpga/of-fpga-region.c | 3 +++
> drivers/fpga/stratix10-soc.c | 5 ++++-
> include/linux/fpga/fpga-mgr.h | 3 +++
> 4 files changed, 11 insertions(+), 1 deletion(-)
>
> --
> 2.7.4

\
 
 \ /
  Last update: 2020-11-16 03:47    [W:0.161 / U:2.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site