lkml.org 
[lkml]   [2020]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RFC v2 2/5] net: stmmac: dwmac-meson8b: fix enabling the timing-adjustment clock
Date
The timing-adjustment clock only has to be enabled when a) there is a
2ns RX delay configured using device-tree and b) the phy-mode indicates
that the RX delay should be enabled.

Only enable the RX delay if both are true, instead of (by accident) also
enabling it when there's the 2ns RX delay configured but the phy-mode
incicates that the RX delay is not used.

Fixes: 9308c47640d515 ("net: stmmac: dwmac-meson8b: add support for the RX delay configuration")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index dc0b8b6d180d..e27e2e7a53fd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -301,7 +301,7 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
return -EINVAL;
}

- if (rx_dly_config & PRG_ETH0_ADJ_ENABLE) {
+ if (delay_config & PRG_ETH0_ADJ_ENABLE) {
if (!dwmac->timing_adj_clk) {
dev_err(dwmac->dev,
"The timing-adjustment clock is mandatory for the RX delay re-timing\n");
--
2.29.2
\
 
 \ /
  Last update: 2020-11-15 19:56    [W:0.111 / U:22.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site