[lkml]   [2020]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] net: lantiq: Wait for the GPHY firmware to be ready
Hi Andrew,

On Sun, Nov 15, 2020 at 4:57 PM Andrew Lunn <> wrote:
> > Add a 300ms delay after initializing all GPHYs to ensure that the GPHY
> > firmware had enough time to initialize and to appear on the MDIO bus.
> > Unfortunately there is no (known) documentation on what the minimum time
> > to wait after releasing the reset on an internal PHY so play safe and
> > take the one for the external variant. Only wait after the last GPHY
> > firmware is loaded to not slow down the initialization too much (
> > xRX200 has two GPHYs but newer SoCs have at least three GPHYs).
> Hi Martin
> Could this be moved into gswip_gphy_fw_list() where the actual
> firmware download happens?
> To me that seems like the more logical place.
good point, that's closer to the loop over all GPHY instances.
I've taken care of it in v2 - many thanks!

Best regards,

 \ /
  Last update: 2020-11-15 18:00    [W:0.029 / U:1.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site