lkml.org 
[lkml]   [2020]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next] net: mvneta: Fix validation of 2.5G HSGMII without comphy
Date
Commit 1a642ca7f38992b086101fe204a1ae3c90ed8016 (net: ethernet: mvneta:
Add 2500BaseX support for SoCs without comphy) added support for 2500BaseX.

In case a comphy is not provided, mvneta_validate()'s check
state->interface == PHY_INTERFACE_MODE_2500BASEX
could never be true (it would've returned with empty bitmask before),
so that 2500baseT_Full and 2500baseX_Full do net get added to the mask.

This causes phylink_sfp_config() to fail validation of 2.5G SFP support.

Address this by adding 2500baseX_Full and 2500baseT_Full to the mask for
state->interface == PHY_INTERFACE_MODE_NA
as well.

Also handle PHY_INTERFACE_MODE_2500BASEX in two checks for allowed modes
and update a comment.

Tested with 2.5G and 1G SFPs on Turris Omnia before assigning comphy.

Fixes: 1a642ca7f389 ("net: ethernet: mvneta: Add 2500BaseX support for SoCs without comphy")
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Marek Behún <kabel@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
drivers/net/ethernet/marvell/mvneta.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 54b0bf574c05..c5016036de3a 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3812,10 +3812,11 @@ static void mvneta_validate(struct phylink_config *config,
struct mvneta_port *pp = netdev_priv(ndev);
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };

- /* We only support QSGMII, SGMII, 802.3z and RGMII modes */
+ /* We only support QSGMII, SGMII, HSGMII, 802.3z and RGMII modes */
if (state->interface != PHY_INTERFACE_MODE_NA &&
state->interface != PHY_INTERFACE_MODE_QSGMII &&
state->interface != PHY_INTERFACE_MODE_SGMII &&
+ state->interface != PHY_INTERFACE_MODE_2500BASEX &&
!phy_interface_mode_is_8023z(state->interface) &&
!phy_interface_mode_is_rgmii(state->interface)) {
bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
@@ -3834,7 +3835,8 @@ static void mvneta_validate(struct phylink_config *config,
phylink_set(mask, 1000baseT_Full);
phylink_set(mask, 1000baseX_Full);
}
- if (pp->comphy || state->interface == PHY_INTERFACE_MODE_2500BASEX) {
+ if (pp->comphy || state->interface == PHY_INTERFACE_MODE_2500BASEX
+ || state->interface == PHY_INTERFACE_MODE_NA) {
phylink_set(mask, 2500baseT_Full);
phylink_set(mask, 2500baseX_Full);
}
@@ -5038,6 +5040,7 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)

if (phy_mode != PHY_INTERFACE_MODE_QSGMII &&
phy_mode != PHY_INTERFACE_MODE_SGMII &&
+ phy_mode != PHY_INTERFACE_MODE_2500BASEX &&
!phy_interface_mode_is_8023z(phy_mode) &&
!phy_interface_mode_is_rgmii(phy_mode))
return -EINVAL;
--
2.28.0
\
 
 \ /
  Last update: 2020-11-15 01:43    [W:0.035 / U:2.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site