lkml.org 
[lkml]   [2020]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/3] dmaengine: Add support for QCOM GSI dma controller
Date
This series adds support for Qcom GSI dma controller found on Qualcomm SoCs.
This controller can program the peripheral configuration so we add
additional parameters in dma_slave_config for configuring the peripherals
like spi and i2c.

Changes in v3:
- Update the i2c tre creation based on testing feedback

Changes in v2:
- Update the binding and drop qcom specific properties
- Move peripheral configuration as a pointer
- Move submit queue for transactions to issue_pending

Vinod Koul (3):
dt-bindings: dmaengine: Document qcom,gpi dma binding
dmaengine: add peripheral configuration
dmaengine: qcom: Add GPI dma driver

.../devicetree/bindings/dma/qcom,gpi.yaml | 86 +
drivers/dma/qcom/Kconfig | 12 +
drivers/dma/qcom/Makefile | 1 +
drivers/dma/qcom/gpi.c | 2303 +++++++++++++++++
include/dt-bindings/dma/qcom-gpi.h | 11 +
include/linux/dmaengine.h | 5 +
include/linux/qcom-gpi-dma.h | 83 +
7 files changed, 2501 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/qcom,gpi.yaml
create mode 100644 drivers/dma/qcom/gpi.c
create mode 100644 include/dt-bindings/dma/qcom-gpi.h
create mode 100644 include/linux/qcom-gpi-dma.h

--
2.26.2

\
 
 \ /
  Last update: 2020-10-08 14:33    [W:0.107 / U:3.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site