lkml.org 
[lkml]   [2020]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 2/2] arm: sti LL_UART: add STiH418 SBC UART0 support
Date
Hi Alain

On 8/30/20 9:57 PM, Alain Volmat wrote:
> Add the entry for the STiH418 SBC UART0 low level uart.
>
> Signed-off-by: Alain Volmat <avolmat@me.com>
> ---
> arch/arm/Kconfig.debug | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index e97d6e5c8898..447d177fcf8d 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -1204,6 +1204,16 @@ choice
>
> If unsure, say N.
>
> + config DEBUG_STIH418_SBC_ASC0
> + bool "Use StiH418 SBC ASC0 UART for low-level debug"
> + depends on ARCH_STI
> + help
> + Say Y here if you want kernel low-level debugging support
> + on STiH418 based platforms which has default UART wired
> + up to SBC ASC0.
> +
> + If unsure, say N.
> +
> config STM32F4_DEBUG_UART
> bool "Use STM32F4 UART for low-level debug"
> depends on MACH_STM32F429 || MACH_STM32F469
> @@ -1587,6 +1597,7 @@ config DEBUG_LL_INCLUDE
> default "debug/sirf.S" if DEBUG_SIRFSOC_UART
> default "debug/sti.S" if DEBUG_STIH41X_ASC2
> default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
> + default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0
> default "debug/stm32.S" if DEBUG_STM32_UART
> default "debug/tegra.S" if DEBUG_TEGRA_UART
> default "debug/ux500.S" if DEBUG_UX500_UART
> @@ -1620,6 +1631,7 @@ config DEBUG_UART_PHYS
> default 0x03010fe0 if ARCH_RPC
> default 0x07000000 if DEBUG_SUN9I_UART0
> default 0x09405000 if DEBUG_ZTE_ZX
> + default 0x09530000 if DEBUG_STIH418_SBC_ASC0
> default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
> DEBUG_VEXPRESS_UART0_CA9
> default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
> @@ -1750,7 +1762,8 @@ config DEBUG_UART_PHYS
> DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
> DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
> DEBUG_AT91_UART || DEBUG_STM32_UART || \
> - DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1
> + DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
> + DEBUG_STIH418_SBC_ASC0
>
> config DEBUG_UART_VIRT
> hex "Virtual base address of debug UART"
> @@ -1796,6 +1809,7 @@ config DEBUG_UART_VIRT
> default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
> default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
> default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
> + default 0xf9530000 if DEBUG_STIH418_SBC_ASC0
> default 0xf9e09000 if DEBUG_AM33XXUART1
> default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
> default 0xfa022000 if DEBUG_TI81XXUART2
> @@ -1864,7 +1878,8 @@ config DEBUG_UART_VIRT
> DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
> DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
> DEBUG_AT91_UART || DEBUG_STM32_UART || \
> - DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1
> + DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
> + DEBUG_STIH418_SBC_ASC0
>
> config DEBUG_UART_8250_SHIFT
> int "Register offset shift for the 8250 debug UART"

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>

Thanks

Patrice
\
 
 \ /
  Last update: 2020-10-06 09:08    [W:0.156 / U:0.820 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site