lkml.org 
[lkml]   [2020]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: drm/bridge: ti-sn65dsi86: Replace #pwm-cells
On Wed, 30 Sep 2020 17:35:31 -0500, Bjorn Andersson wrote:
> While the signal on GPIO4 to drive the backlight controller indeed is
> pulse width modulated its purpose is specifically to control the
> brightness of a backlight.
>
> Drop the #pwm-cells and instead expose a new property to configure the
> granularity of the backlight PWM signal.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> .../devicetree/bindings/display/bridge/ti,sn65dsi86.yaml | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>


My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml: properties:ti,backlight-scale: {'description': 'The granularity of brightness for the PWM signal provided on GPIO4, if this property is specified.', 'minimum': 0, 'maximum': 65535} is not valid under any of the given schemas (Possible causes of the failure):
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml: properties:ti,backlight-scale: 'not' is a required property

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml: ignoring, error in schema: properties: ti,backlight-scale
warning: no schema found in file: ./Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml


See https://patchwork.ozlabs.org/patch/1374751

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.

\
 
 \ /
  Last update: 2020-10-05 15:51    [W:0.170 / U:1.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site