lkml.org 
[lkml]   [2020]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM: dts: at91: add serial MFD sub-node for usart
From
Date
On 30/10/2020 at 12:07, Codrin Ciubotariu wrote:
> The "atmel,at91sam9260-usart" driver is a MFD driver, so it needs sub-nodes
> to match the registered platform device. For this reason, we add a serial
> subnode to all the "atmel,at91sam9260-usart" serial compatible nods. This
> will also remove the boot warning:
> "atmel_usart_serial: Failed to locate of_node [id: -2]"

I don't remember this warning was raised previously even if the MFD
driver was added a while ago (Sept. 2018).

I would say it's due to 466a62d7642f ("mfd: core: Make a best effort
attempt to match devices with the correct of_nodes") which was added on
mid August and corrected with 22380b65dc70 ("mfd: mfd-core: Ensure
disabled devices are ignored without error") but maybe not covering our
case.

So, well, I don't know what's the best option to this change. Moreover,
I would say that all other USART related properties go into the child
not if there is a need for one.

Lee, I suspect that we're not the only ones experiencing this ugly
warning during the boot log: can you point us out how to deal with it
for our existing atmel_serial.c users?

Best regards,
Nicolas

> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
> ---
> arch/arm/boot/dts/at91-sam9x60ek.dts | 3 +++
> arch/arm/boot/dts/at91rm9200.dtsi | 15 ++++++++++++
> arch/arm/boot/dts/at91sam9261.dtsi | 12 ++++++++++
> arch/arm/boot/dts/at91sam9261ek.dts | 3 +++
> arch/arm/boot/dts/at91sam9263.dtsi | 12 ++++++++++
> arch/arm/boot/dts/at91sam9g45.dtsi | 15 ++++++++++++
> arch/arm/boot/dts/at91sam9n12.dtsi | 15 ++++++++++++
> arch/arm/boot/dts/at91sam9rl.dtsi | 15 ++++++++++++
> arch/arm/boot/dts/at91sam9x5.dtsi | 18 ++++++++++++++
> arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 3 +++
> arch/arm/boot/dts/sam9x60.dtsi | 3 +++
> arch/arm/boot/dts/sama5d2.dtsi | 30 ++++++++++++++++++++++++
> arch/arm/boot/dts/sama5d3.dtsi | 18 ++++++++++++++
> arch/arm/boot/dts/sama5d3_uart.dtsi | 6 +++++
> arch/arm/boot/dts/sama5d4.dtsi | 30 ++++++++++++++++++++++++
> 15 files changed, 198 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
> index eae28b82c7fd..e317531f7363 100644
> --- a/arch/arm/boot/dts/at91-sam9x60ek.dts
> +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
> @@ -280,6 +280,9 @@ AT91_XDMAC_DT_PERID(10))>,
> atmel,use-dma-rx;
> atmel,use-dma-tx;
> status = "okay";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
> };
>
> diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
> index d1181ead18e5..2abb646f6b68 100644
> --- a/arch/arm/boot/dts/at91rm9200.dtsi
> +++ b/arch/arm/boot/dts/at91rm9200.dtsi
> @@ -602,6 +602,9 @@ dbgu: serial@fffff200 {
> clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart0: serial@fffc0000 {
> @@ -615,6 +618,9 @@ usart0: serial@fffc0000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart1: serial@fffc4000 {
> @@ -628,6 +634,9 @@ usart1: serial@fffc4000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart2: serial@fffc8000 {
> @@ -641,6 +650,9 @@ usart2: serial@fffc8000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart3: serial@fffcc000 {
> @@ -654,6 +666,9 @@ usart3: serial@fffcc000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usb1: gadget@fffb0000 {
> diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
> index 7adc36ca8a46..e9602378f92c 100644
> --- a/arch/arm/boot/dts/at91sam9261.dtsi
> +++ b/arch/arm/boot/dts/at91sam9261.dtsi
> @@ -187,6 +187,9 @@ usart0: serial@fffb0000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart1: serial@fffb4000 {
> @@ -200,6 +203,9 @@ usart1: serial@fffb4000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart2: serial@fffb8000{
> @@ -213,6 +219,9 @@ usart2: serial@fffb8000{
> clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> ssc0: ssc@fffbc000 {
> @@ -307,6 +316,9 @@ dbgu: serial@fffff200 {
> clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> pinctrl@fffff400 {
> diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
> index beed819609e8..fae5d408268d 100644
> --- a/arch/arm/boot/dts/at91sam9261ek.dts
> +++ b/arch/arm/boot/dts/at91sam9261ek.dts
> @@ -176,6 +176,9 @@ tsc2046@2 {
>
> dbgu: serial@fffff200 {
> status = "okay";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> watchdog@fffffd40 {
> diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
> index fe45d96239c9..e4d370b582c8 100644
> --- a/arch/arm/boot/dts/at91sam9263.dtsi
> +++ b/arch/arm/boot/dts/at91sam9263.dtsi
> @@ -546,6 +546,9 @@ dbgu: serial@ffffee00 {
> clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart0: serial@fff8c000 {
> @@ -559,6 +562,9 @@ usart0: serial@fff8c000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart1: serial@fff90000 {
> @@ -572,6 +578,9 @@ usart1: serial@fff90000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart2: serial@fff94000 {
> @@ -585,6 +594,9 @@ usart2: serial@fff94000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> ssc0: ssc@fff98000 {
> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
> index 19fc748a87c5..8aad026f10ec 100644
> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
> @@ -682,6 +682,9 @@ dbgu: serial@ffffee00 {
> clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart0: serial@fff8c000 {
> @@ -695,6 +698,9 @@ usart0: serial@fff8c000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart1: serial@fff90000 {
> @@ -708,6 +714,9 @@ usart1: serial@fff90000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart2: serial@fff94000 {
> @@ -721,6 +730,9 @@ usart2: serial@fff94000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart3: serial@fff98000 {
> @@ -734,6 +746,9 @@ usart3: serial@fff98000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> macb0: ethernet@fffbc000 {
> diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
> index 0785389f5507..f83d1a313edf 100644
> --- a/arch/arm/boot/dts/at91sam9n12.dtsi
> +++ b/arch/arm/boot/dts/at91sam9n12.dtsi
> @@ -599,6 +599,9 @@ dbgu: serial@fffff200 {
> clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> ssc0: ssc@f0010000 {
> @@ -624,6 +627,9 @@ usart0: serial@f801c000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart1: serial@f8020000 {
> @@ -635,6 +641,9 @@ usart1: serial@f8020000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart2: serial@f8024000 {
> @@ -646,6 +655,9 @@ usart2: serial@f8024000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart3: serial@f8028000 {
> @@ -657,6 +669,9 @@ usart3: serial@f8028000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> i2c0: i2c@f8010000 {
> diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
> index 5653e70c84b4..5480b6542c6a 100644
> --- a/arch/arm/boot/dts/at91sam9rl.dtsi
> +++ b/arch/arm/boot/dts/at91sam9rl.dtsi
> @@ -183,6 +183,9 @@ usart0: serial@fffb0000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart1: serial@fffb4000 {
> @@ -196,6 +199,9 @@ usart1: serial@fffb4000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart2: serial@fffb8000 {
> @@ -209,6 +215,9 @@ usart2: serial@fffb8000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart3: serial@fffbc000 {
> @@ -222,6 +231,9 @@ usart3: serial@fffbc000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> ssc0: ssc@fffc0000 {
> @@ -353,6 +365,9 @@ dbgu: serial@fffff200 {
> clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> pinctrl@fffff400 {
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index 4cdb05079cc7..52aa49b007d1 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -683,6 +683,9 @@ dbgu: serial@fffff200 {
> clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart0: serial@f801c000 {
> @@ -697,6 +700,9 @@ usart0: serial@f801c000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart1: serial@f8020000 {
> @@ -711,6 +717,9 @@ usart1: serial@f8020000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart2: serial@f8024000 {
> @@ -725,6 +734,9 @@ usart2: serial@f8024000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> i2c0: i2c@f8010000 {
> @@ -781,6 +793,9 @@ uart0: serial@f8040000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> uart1: serial@f8044000 {
> @@ -792,6 +807,9 @@ uart1: serial@f8044000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> adc0: adc@f804c000 {
> diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
> index 098d3fef5c37..a80593188ac1 100644
> --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
> @@ -53,6 +53,9 @@ usart3: serial@f8028000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
> };
> };
> diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
> index 84066c1298df..ab4d80134d86 100644
> --- a/arch/arm/boot/dts/sam9x60.dtsi
> +++ b/arch/arm/boot/dts/sam9x60.dtsi
> @@ -598,6 +598,9 @@ AT91_XDMAC_DT_PERID(28))>,
> clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> pinctrl: pinctrl@fffff400 {
> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> index 2ddc85dff8ce..26f231147d21 100644
> --- a/arch/arm/boot/dts/sama5d2.dtsi
> +++ b/arch/arm/boot/dts/sama5d2.dtsi
> @@ -444,6 +444,9 @@ AT91_XDMAC_DT_PERID(35))>,
> clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> uart1: serial@f8020000 {
> @@ -460,6 +463,9 @@ AT91_XDMAC_DT_PERID(37))>,
> clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> uart2: serial@f8024000 {
> @@ -476,6 +482,9 @@ AT91_XDMAC_DT_PERID(39))>,
> clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> i2c0: i2c@f8028000 {
> @@ -536,6 +545,9 @@ AT91_XDMAC_DT_PER_IF(1) |
> dma-names = "tx", "rx";
> atmel,fifo-size = <32>;
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> spi2: spi@400 {
> @@ -606,6 +618,9 @@ AT91_XDMAC_DT_PER_IF(1) |
> dma-names = "tx", "rx";
> atmel,fifo-size = <32>;
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> spi3: spi@400 {
> @@ -771,6 +786,9 @@ AT91_XDMAC_DT_PERID(41))>,
> clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> uart4: serial@fc00c000 {
> @@ -787,6 +805,9 @@ AT91_XDMAC_DT_PERID(43))>,
> clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> flx2: flexcom@fc010000 {
> @@ -815,6 +836,9 @@ AT91_XDMAC_DT_PER_IF(1) |
> dma-names = "tx", "rx";
> atmel,fifo-size = <32>;
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> spi4: spi@400 {
> @@ -885,6 +909,9 @@ AT91_XDMAC_DT_PER_IF(1) |
> dma-names = "tx", "rx";
> atmel,fifo-size = <32>;
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> spi5: spi@400 {
> @@ -956,6 +983,9 @@ AT91_XDMAC_DT_PER_IF(1) |
> dma-names = "tx", "rx";
> atmel,fifo-size = <32>;
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> spi6: spi@400 {
> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
> index 86137f8d2b45..1791de52d1c3 100644
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi
> @@ -203,6 +203,9 @@ usart0: serial@f001c000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart1: serial@f0020000 {
> @@ -217,6 +220,9 @@ usart1: serial@f0020000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> uart0: serial@f0024000 {
> @@ -228,6 +234,9 @@ uart0: serial@f0024000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> pwm0: pwm@f002c000 {
> @@ -389,6 +398,9 @@ usart2: serial@f8020000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart3: serial@f8024000 {
> @@ -403,6 +415,9 @@ usart3: serial@f8024000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> sha@f8034000 {
> @@ -497,6 +512,9 @@ dbgu: serial@ffffee00 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> aic: interrupt-controller@fffff000 {
> diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
> index a3eaba995cf4..b9f83b771a09 100644
> --- a/arch/arm/boot/dts/sama5d3_uart.dtsi
> +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
> @@ -45,6 +45,9 @@ uart0: serial@f0024000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> uart1: serial@f8028000 {
> @@ -56,6 +59,9 @@ uart1: serial@f8028000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
> };
> };
> diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
> index 04f24cf752d3..0627fa8cdaf4 100644
> --- a/arch/arm/boot/dts/sama5d4.dtsi
> +++ b/arch/arm/boot/dts/sama5d4.dtsi
> @@ -284,6 +284,9 @@ uart0: serial@f8004000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> ssc0: ssc@f8008000 {
> @@ -443,6 +446,9 @@ usart0: serial@f802c000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart1: serial@f8030000 {
> @@ -461,6 +467,9 @@ usart1: serial@f8030000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> mmc1: mmc@fc000000 {
> @@ -496,6 +505,9 @@ uart1: serial@fc004000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart2: serial@fc008000 {
> @@ -514,6 +526,9 @@ usart2: serial@fc008000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart3: serial@fc00c000 {
> @@ -532,6 +547,9 @@ usart3: serial@fc00c000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> usart4: serial@fc010000 {
> @@ -550,6 +568,9 @@ usart4: serial@fc010000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> ssc1: ssc@fc014000 {
> @@ -568,6 +589,9 @@ ssc1: ssc@fc014000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
> clock-names = "pclk";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> spi1: spi@fc018000 {
> @@ -588,6 +612,9 @@ spi1: spi@fc018000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
> clock-names = "spi_clk";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
> spi2: spi@fc01c000 {
> @@ -794,6 +821,9 @@ dbgu: serial@fc069000 {
> clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
> clock-names = "usart";
> status = "disabled";
> + serial {
> + compatible = "atmel,at91rm9200-usart-serial";
> + };
> };
>
>
>


--
Nicolas Ferre

\
 
 \ /
  Last update: 2020-10-30 14:39    [W:0.139 / U:5.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site