lkml.org 
[lkml]   [2020]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 08/11] arm64: dts: ls2088ardb: add PHY nodes for the AQR405 PHYs
Date
From: Ioana Ciornei <ioana.ciornei@nxp.com>

Annotate the EMDIO2 node and describe the other 4 10GBASER PHYs found on
the LS2088ARDB board. Also, add phy-handles for DPMACs 5-8 to their
associated PHY.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
Changes in v2:
- none
Changes in v3:
- none
Changes in v4:
- move the phy-connection-type attribute to the ethernet node
- remove the interrupt description
Changes in v5:
- renamed all PHY nodes to ethernet-phy

.../boot/dts/freescale/fsl-ls2088a-rdb.dts | 44 +++++++++++++++++++
1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
index a4b0dcab6e8e..854f604049ca 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -43,6 +43,26 @@ &dpmac4 {
phy-connection-type = "10gbase-r";
};

+&dpmac5 {
+ phy-handle = <&mdio2_phy1>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac6 {
+ phy-handle = <&mdio2_phy2>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac7 {
+ phy-handle = <&mdio2_phy3>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac8 {
+ phy-handle = <&mdio2_phy4>;
+ phy-connection-type = "10gbase-r";
+};
+
&emdio1 {
status = "okay";

@@ -66,3 +86,27 @@ mdio1_phy4: ethernet-phy@13 {
reg = <0x13>;
};
};
+
+&emdio2 {
+ status = "okay";
+
+ mdio2_phy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+
+ mdio2_phy2: ethernet-phy@1 {
+ compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+ reg = <0x1>;
+ };
+
+ mdio2_phy3: ethernet-phy@2 {
+ compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+ reg = <0x2>;
+ };
+
+ mdio2_phy4: ethernet-phy@3 {
+ compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+ reg = <0x3>;
+ };
+};
--
2.28.0
\
 
 \ /
  Last update: 2020-10-30 12:38    [W:0.122 / U:4.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site