lkml.org 
[lkml]   [2020]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/6] ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi
Date
The Allwinner V3 and S3 can use PG6/7 as RX/TX for UART1. Since no other
functions are assigned to those pins, they are a convenient choice for
a debugging or application UART.
This is specific to V3/S3 as the V3s's non-BGA package did not have
those pins.

Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
---
arch/arm/boot/dts/sun8i-v3.dtsi | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi
index ca4672ed2e02..c279e13583ba 100644
--- a/arch/arm/boot/dts/sun8i-v3.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3.dtsi
@@ -24,4 +24,9 @@

&pio {
compatible = "allwinner,sun8i-v3-pinctrl";
+
+ uart1_pg_pins: uart1-pg-pins {
+ pins = "PG6", "PG7";
+ function = "uart1";
+ };
};
--
2.20.1
\
 
 \ /
  Last update: 2020-10-31 00:45    [W:0.261 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site