lkml.org 
[lkml]   [2020]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/5] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC
Hi,

On Thu 29 Oct 20, 02:20, Matteo Scordino wrote:
> The Elimo Engineering Initium is an Open Source Hardware Single Board
> Computer based on the Elimo Impetus SoM.
>
> It is meant as the first development platform for the Impetus, providing
> convenient access to the peripherals on the Impetus.
>
> It provides:
> USB-C power input
> UART-to-USB bridge on the USB-C connector, connected to UART1
> USB-A connector for USB2.0 (Host, Device, OTG)
> Audio Line In/Out
> Pin header to access all signals on the M2 connector of the SoM
>
> Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/sun8i-s3-elimo-initium.dts | 27 ++++++++++++++++++++
> 2 files changed, 28 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4f0adfead547..dcfb8d39c267 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1210,6 +1210,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> sun8i-r40-bananapi-m2-ultra.dtb \
> sun8i-s3-lichee-zero-plus.dtb \
> sun8i-s3-pinecube.dtb \
> + sun8i-s3-elimo-initium.dtb \
> sun8i-t3-cqa3t-bv3.dtb \
> sun8i-v3s-licheepi-zero.dtb \
> sun8i-v3s-licheepi-zero-dock.dtb \
> diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
> new file mode 100644
> index 000000000000..5ddd4dbd636c
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
> @@ -0,0 +1,27 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
> + */
> +
> +/dts-v1/;
> +#include "sun8i-s3-elimo-impetus.dtsi"
> +
> +/ {
> + model = "Elimo Initium";
> + compatible = "elimo,initium", "elimo,impetus", "allwinner,sun8i-s3";

Same comment as before about having an extra "allwinner,sun8i-v3" here.

Cheers,

Paul

> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&emac {
> + phy-handle = <&int_mii_phy>;
> + phy-mode = "mii";
> + status = "okay";
> +};
> --
> 2.20.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-10-29 11:11    [W:0.290 / U:1.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site