lkml.org 
[lkml]   [2020]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/5] ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi
Hi,

On Thu 29 Oct 20, 02:19, Matteo Scordino wrote:
> The Allwinner V3 and S3 can use PG6/7 as RX/TX for UART1. Since no other
> functions are assigned to those pins, they are a convenient choice for
> a debugging or application UART.
> This is specific to V3/S3 as the V3s's non-BGA package did not have
> those pins.

Looks good to me, I've had to make the same change when bringing up both
another S3 and another V3 board.

Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>

Cheers,

Paul

> Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
> ---
> arch/arm/boot/dts/sun8i-v3.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi
> index ca4672ed2e02..c279e13583ba 100644
> --- a/arch/arm/boot/dts/sun8i-v3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-v3.dtsi
> @@ -24,4 +24,9 @@
>
> &pio {
> compatible = "allwinner,sun8i-v3-pinctrl";
> +
> + uart1_pg_pins: uart1-pg-pins {
> + pins = "PG6", "PG7";
> + function = "uart1";
> + };
> };
> --
> 2.20.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-10-29 11:05    [W:0.363 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site