lkml.org 
[lkml]   [2020]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 25/29] arm64: dts: apm: Harmonize DWC USB3 DT nodes name
Date
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named despite of the warning comment about possible backward
compatibility issues.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 4 ++--
arch/arm64/boot/dts/apm/apm-storm.dtsi | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index 3feb1881bbc2..a0a194b8db7a 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -597,8 +597,8 @@ serial0: serial@10600000 {
interrupts = <0x0 0x4c 0x4>;
};

- /* Do not change dwusb name, coded for backward compatibility */
- usb0: dwusb@19000000 {
+ /* Node-name might need to be coded as dwusb for backward compatibility */
+ usb0: usb@19000000 {
status = "disabled";
compatible = "snps,dwc3";
reg = <0x0 0x19000000 0x0 0x100000>;
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 8c802d87e751..f5083b3b9579 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -923,8 +923,8 @@ sata3: sata@1a800000 {
phy-names = "sata-phy";
};

- /* Do not change dwusb name, coded for backward compatibility */
- usb0: dwusb@19000000 {
+ /* Node-name might need to be coded as dwusb for backward compatibility */
+ usb0: usb@19000000 {
status = "disabled";
compatible = "snps,dwc3";
reg = <0x0 0x19000000 0x0 0x100000>;
@@ -933,7 +933,7 @@ usb0: dwusb@19000000 {
dr_mode = "host";
};

- usb1: dwusb@19800000 {
+ usb1: usb@19800000 {
status = "disabled";
compatible = "snps,dwc3";
reg = <0x0 0x19800000 0x0 0x100000>;
--
2.27.0
\
 
 \ /
  Last update: 2020-10-20 14:01    [W:0.408 / U:3.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site