[lkml]   [2020]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v8 00/14] Add RCEC handling to PCI/AER
From: Sean V Kelley <>

Changes since v7 [1]:

- No functional changes.

- Reword bridge patch.
- Noted testing below for #non-native/no RCEC case
(Jonathan Cameron)

- Separate out pci_walk_bus() into pci_walk_bridge() change.
- Put remaining dev to bridge name changes in the separate patch from v7.
(Bjorn Helgaas)


Root Complex Event Collectors (RCEC) provide support for terminating error
and PME messages from Root Complex Integrated Endpoints (RCiEPs). An RCEC
resides on a Bus in the Root Complex. Multiple RCECs can in fact reside on
a single bus. An RCEC will explicitly declare supported RCiEPs through the
Root Complex Endpoint Association Extended Capability.

(See PCIe 5.0-1, sections (RCiEP), and 7.9.10 (RCEC Ext. Cap.))

The kernel lacks handling for these RCECs and the error messages received
from their respective associated RCiEPs. More recently, a new CPU
interconnect, Compute eXpress Link (CXL) depends on RCEC capabilities for
purposes of error messaging from CXL 1.1 supported RCiEP devices.


This use case is not limited to CXL. Existing hardware today includes
support for RCECs, such as the Denverton microserver product
family. Future hardware will be forthcoming.

(See Intel Document, Order number: 33061-003US)

So services such as AER or PME could be associated with an RCEC driver.
In the case of CXL, if an RCiEP (i.e., CXL 1.1 device) is associated with a
platform's RCEC it shall signal PME and AER error conditions through that

Towards the above use cases, add the missing RCEC class and extend the
PCIe Root Port and service drivers to allow association of RCiEPs to their
respective parent RCEC and facilitate handling of terminating error and PME

Tested-by: Jonathan Cameron <> #non-native/no RCEC

Jonathan Cameron (1):
PCI/AER: Extend AER error handling to RCECs

Qiuxu Zhuo (5):
PCI/RCEC: Add RCEC class code and extended capability
PCI/RCEC: Bind RCEC devices to the Root Port driver
PCI/AER: Apply function level reset to RCiEP on fatal error
PCI/RCEC: Add RCiEP's linked RCEC to AER/ERR
PCI/AER: Add RCEC AER error injection support

Sean V Kelley (8):
PCI/RCEC: Cache RCEC capabilities in pci_init_capabilities()
PCI/ERR: Rename reset_link() to reset_subordinate_device()
PCI/ERR: Use "bridge" for clarity in pcie_do_recovery()
PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery()
PCI/ERR: Limit AER resets in pcie_do_recovery()
PCI/RCEC: Add pcie_link_rcec() to associate RCiEPs
PCI/AER: Add pcie_walk_rcec() to RCEC AER handling
PCI/PME: Add pcie_walk_rcec() to RCEC PME handling

drivers/pci/pci.h | 25 ++++-
drivers/pci/pcie/Makefile | 2 +-
drivers/pci/pcie/aer.c | 36 ++++--
drivers/pci/pcie/aer_inject.c | 5 +-
drivers/pci/pcie/err.c | 109 +++++++++++++++----
drivers/pci/pcie/pme.c | 15 ++-
drivers/pci/pcie/portdrv_core.c | 8 +-
drivers/pci/pcie/portdrv_pci.c | 8 +-
drivers/pci/pcie/rcec.c | 187 ++++++++++++++++++++++++++++++++
drivers/pci/probe.c | 2 +
include/linux/pci.h | 5 +
include/linux/pci_ids.h | 1 +
include/uapi/linux/pci_regs.h | 7 ++
13 files changed, 367 insertions(+), 43 deletions(-)
create mode 100644 drivers/pci/pcie/rcec.c


 \ /
  Last update: 2020-10-02 20:49    [W:0.107 / U:21.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site