lkml.org 
[lkml]   [2020]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 2/3] media: i2c: ov772x: Add support for BT.656 mode
Date
Add support to read the bus-type for V4L2_MBUS_BT656 and enable BT.656
mode in the sensor if needed.

For backward compatibility with older DTS where the bus-type property was
not mandatory, assume V4L2_MBUS_PARALLEL as it was the only supported bus
at the time. v4l2_fwnode_endpoint_alloc_parse() will not fail if
'bus-type' is not specified.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
drivers/media/i2c/ov772x.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index b56f8d7609e6..6b46ad493bf7 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -583,6 +583,13 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
if (priv->streaming == enable)
goto done;

+ if (priv->bus_type == V4L2_MBUS_BT656) {
+ ret = regmap_update_bits(priv->regmap, COM7, ITU656_ON_OFF,
+ enable ? ITU656_ON_OFF : ~ITU656_ON_OFF);
+ if (ret)
+ goto done;
+ }
+
ret = regmap_update_bits(priv->regmap, COM2, SOFT_SLEEP_MODE,
enable ? 0 : SOFT_SLEEP_MODE);
if (ret)
@@ -1364,9 +1371,21 @@ static int ov772x_parse_dt(struct i2c_client *client,
return -EINVAL;
}

+ /*
+ * For backward compatibility with older DTS where the
+ * bus-type property was not mandatory, assume
+ * V4L2_MBUS_PARALLEL as it was the only supported bus at the
+ * time. v4l2_fwnode_endpoint_alloc_parse() will not fail if
+ * 'bus-type' is not specified.
+ */
ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
- if (ret)
- goto error_fwnode_put;
+ if (ret) {
+ bus_cfg = (struct v4l2_fwnode_endpoint)
+ { .bus_type = V4L2_MBUS_BT656 };
+ ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
+ if (ret)
+ goto error_fwnode_put;
+ }

priv->bus_type = bus_cfg.bus_type;
v4l2_fwnode_endpoint_free(&bus_cfg);
--
2.17.1
\
 
 \ /
  Last update: 2020-10-02 18:58    [W:0.106 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site