[lkml]   [2020]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: dsa: mv88e6xxx: serdes link without phy

On 2/10/20 1:36 am, Andrew Lunn wrote:
>>> Can you run 1000Base-X over these links?
>> With some reading "1000base-x" does seem the right thing to say here.
>> It's even what is reflected in the CMODE field for those ports.
> One more thing you might need is
> managed = "in-band-status";
>>> If you can, it is probably
>>> worth chatting to Russell King about using inband-signalling, and what
>>> is needed to make it work without having back to back SFPs. If i
>>> remember correctly, Russell has said not much is actually needed.
>> That'd be ideal. The sticking point seems to be allowing it to have no PHY.
> I think there is more to it than that. This is new ground to some
> extent.

managed = "in-band-status"; helps to convince things that there isn't a
PHY. I need to update mv88e6xxx_mac_link_up to not force the link when
mode == MLO_AN_INBAND.

I also have a problem with mv88e6xxx_serdes_pcs_get_state expecting
mv88e6xxx_serdes_get_lane() to return a lane number. Implementing
mv88e6xxx_serdes_get_lane() for the mv88e6097 causes a lot of other code
paths to trigger which didn't before. I think I'm close to getting
something sensible working for my hardware but I'm off on leave for a
week so I just wanted to get this out before I go.
 \ /
  Last update: 2020-10-02 06:14    [W:0.060 / U:2.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site