[lkml]   [2020]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v6 00/14] *Add Broadcom VK driver
This patch series drops previous patches in [1]
that were incorporated by Kees Cook into patch series
"Introduce partial kernel_read_file() support" [2].

Remaining patches are contained in this series to add Broadcom VK driver.
(which depends on request_firmware_into_buf API addition in
other patch series [2] being applied first).

Please note this patch series will not compile without [2].


Changes from v5:
- dropped sysfs patch from series for now as rework to use hwmon
- tty patch still at end of series to drop if another solution available
- updated cover letter commit to point to Kees' latest patch submission in [2]
- specified --base with Kees' patches applied (kernel branches don't have these yet)
- removed trivial comment
- moved location of const to before the struct in two declarations
- changed dev_info to dev_warn and only print when irq don't match expected
- changed dev_info to dev_dbg when printing debug QSTATS
- removed unnecessary %p print
Changes from v4:
- fixed memory leak in probe function on failure
- changed -1 to -EBUSY in bcm_vk_tty return code
- move bcm_vk_tty patch to end of patch series so it
can be dropped from current patch series if needed
and rearchitected if needed.
Changes from v3:
- split driver into more incremental commits for acceptance/review
- lowered some dev_info to dev_dbg
- remove ANSI stdint types and replace with linux u8, etc types
- changed an EIO return to EPFNOSUPPORT
- move vk_msg_cmd internal to driver to not expose to UAPI at this time
Changes from v2:
- open code BIT macro in uapi header
- A0/B0 boot improvements
Changes from v1:
- declare bcm_vk_intf_ver_chk as static

Scott Branden (14):
bcm-vk: add bcm_vk UAPI
misc: bcm-vk: add Broadcom VK driver
misc: bcm-vk: add autoload support
misc: bcm-vk: add misc device to Broadcom VK driver
misc: bcm-vk: add triggers when host panic or reboots to notify card
misc: bcm-vk: add open/release
misc: bcm-vk: add ioctl load_image
misc: bcm-vk: add get_card_info, peerlog_info, and proc_mon_info
misc: bcm-vk: add VK messaging support
misc: bcm-vk: reset_pid support
misc: bcm-vk: add BCM_VK_QSTATS
misc: bcm-vk: add mmap function for exposing BAR2
MAINTAINERS: bcm-vk: add maintainer for Broadcom VK Driver
misc: bcm-vk: add ttyVK support

drivers/misc/Kconfig | 1 +
drivers/misc/Makefile | 1 +
drivers/misc/bcm-vk/Kconfig | 29 +
drivers/misc/bcm-vk/Makefile | 12 +
drivers/misc/bcm-vk/bcm_vk.h | 507 ++++++++++
drivers/misc/bcm-vk/bcm_vk_dev.c | 1629 ++++++++++++++++++++++++++++++
drivers/misc/bcm-vk/bcm_vk_msg.c | 1363 +++++++++++++++++++++++++
drivers/misc/bcm-vk/bcm_vk_msg.h | 169 ++++
drivers/misc/bcm-vk/bcm_vk_sg.c | 275 +++++
drivers/misc/bcm-vk/bcm_vk_sg.h | 61 ++
drivers/misc/bcm-vk/bcm_vk_tty.c | 333 ++++++
include/uapi/linux/misc/bcm_vk.h | 84 ++
13 files changed, 4471 insertions(+)
create mode 100644 drivers/misc/bcm-vk/Kconfig
create mode 100644 drivers/misc/bcm-vk/Makefile
create mode 100644 drivers/misc/bcm-vk/bcm_vk.h
create mode 100644 drivers/misc/bcm-vk/bcm_vk_dev.c
create mode 100644 drivers/misc/bcm-vk/bcm_vk_msg.c
create mode 100644 drivers/misc/bcm-vk/bcm_vk_msg.h
create mode 100644 drivers/misc/bcm-vk/bcm_vk_sg.c
create mode 100644 drivers/misc/bcm-vk/bcm_vk_sg.h
create mode 100644 drivers/misc/bcm-vk/bcm_vk_tty.c
create mode 100644 include/uapi/linux/misc/bcm_vk.h

base-commit: ea39bd280a47b40ed7e756a2f7d669f4a0a0811f

 \ /
  Last update: 2020-10-02 23:25    [W:0.105 / U:2.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site