[lkml]   [2020]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] phy: usb: Fix incorrect clearing of tca_drv_sel bit in SETUP reg for 7211

On 10/2/2020 12:01 PM, Al Cooper wrote:
> The 7211a0 has a tca_drv_sel bit in the USB SETUP register that
> should never be enabled. This feature is only used if there is a
> USB Type-C PHY, and the 7211 does not have one. If the bit is
> enabled, the VBUS signal will never be asserted. In the 7211a0,
> the bit was incorrectly defaulted to on so the driver had to clear
> the bit. In the 7211c0 the state was inverted so the driver should
> no longer clear the bit. This hasn't been a problem because all
> current 7211 boards don't use the VBUS signal, but there are some
> future customer boards that may use it.
> Signed-off-by: Al Cooper <>

Acked-by: Florian Fainelli <>

 \ /
  Last update: 2020-10-02 22:22    [W:0.069 / U:2.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site