lkml.org 
[lkml]   [2020]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 4/4] mmc: mediatek: Add subsys clock control for MT8192 msdc
From
Date


On 14/10/2020 05:06, Nicolas Boichat wrote:
> On Wed, Oct 14, 2020 at 10:29 AM Wenbin Mei <wenbin.mei@mediatek.com> wrote:
>>
>> On Tue, 2020-10-13 at 17:10 +0200, Matthias Brugger wrote:
>>>
>>> On 12/10/2020 14:45, Wenbin Mei wrote:
>>>> MT8192 msdc is an independent sub system, we need control more bus
>>>> clocks for it.
>>>> Add support for the additional subsys clocks to allow it to be
>>>> configured appropriately.
>>>>
>>>> Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
>>>> ---
>>>> drivers/mmc/host/mtk-sd.c | 74 +++++++++++++++++++++++++++++----------
>>>> 1 file changed, 56 insertions(+), 18 deletions(-)
>>>>
>>>> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
>>>> index a704745e5882..c7df7510f120 100644
>>>> --- a/drivers/mmc/host/mtk-sd.c
>>>> +++ b/drivers/mmc/host/mtk-sd.c
>>> [...]
>>>> +static int msdc_of_clock_parse(struct platform_device *pdev,
>>>> + struct msdc_host *host)
>>>> +{
>>>> + int ret;
>>>> +
>>>> + host->src_clk = devm_clk_get(&pdev->dev, "source");
>>>> + if (IS_ERR(host->src_clk))
>>>> + return PTR_ERR(host->src_clk);
>>>> +
>>>> + host->h_clk = devm_clk_get(&pdev->dev, "hclk");
>>>> + if (IS_ERR(host->h_clk))
>>>> + return PTR_ERR(host->h_clk);
>>>> +
>>>> + host->bus_clk = devm_clk_get_optional(&pdev->dev, "bus_clk");
>>>> + if (IS_ERR(host->bus_clk))
>>>> + host->bus_clk = NULL;
>>>> +
>>>> + /*source clock control gate is optional clock*/
>>>> + host->src_clk_cg = devm_clk_get_optional(&pdev->dev, "source_cg");
>>>> + if (IS_ERR(host->src_clk_cg))
>>>> + host->src_clk_cg = NULL;
>>>> +
>>>> + host->sys_clk_cg = devm_clk_get_optional(&pdev->dev, "sys_cg");
>>>> + if (IS_ERR(host->sys_clk_cg))
>>>> + host->sys_clk_cg = NULL;
>>>> +
>>>> + /* If present, always enable for this clock gate */
>>>> + clk_prepare_enable(host->sys_clk_cg);
>>>> +
>>>> + host->bulk_clks[0].id = "pclk_cg";
>>>> + host->bulk_clks[1].id = "axi_cg";
>>>> + host->bulk_clks[2].id = "ahb_cg";
>>>
>>> That looks at least suspicious. The pointers of id point to some strings defined
>>> in the function. Aren't they out of scope once msdc_of_clock_parse() has returned?
>>>
>> These constants are not in stack range, so they will not be lost.
>> And I have confirmed it after msdc_of_clock_parse() has returned, these
>> ids still exist.
>
> Yes I guess the constants end up in .rodata (or similar section), but
> I'm not sure if this is absolutely guaranteed.
>
> In any case, this is a commonly used pattern, so I'd hope it's fine
> (just a sample, there are more):
> https://elixir.bootlin.com/linux/latest/source/drivers/pci/controller/dwc/pcie-qcom.c#L266
> https://elixir.bootlin.com/linux/latest/source/sound/soc/codecs/wm8994.c#L4638
> https://elixir.bootlin.com/linux/latest/source/drivers/mfd/madera-core.c#L467
> https://elixir.bootlin.com/linux/latest/source/drivers/gpio/gpio-dwapb.c#L675
>

Alright, then this looks good, sorry for the noise!
Matthias

\
 
 \ /
  Last update: 2020-10-14 10:25    [W:0.083 / U:8.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site