lkml.org 
[lkml]   [2020]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 6/6] dt-bindings: misc: correct the property name cmd-gpios to cmd-gpio
From
Date


On 2020/10/14 1:32, Dan Murphy wrote:
> Zhen
>
> On 10/13/20 11:08 AM, Zhen Lei wrote:
>> The property name used in arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts is
>> cmd-gpio.
>>
>> arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:235:
>> cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>;
>>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> ---
>>   Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml | 6 +++---
>>   1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
>> index b3c45c046ba5e37..c7a06a9650db2ed 100644
>> --- a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
>> +++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
>> @@ -24,7 +24,7 @@ properties:
>>     compatible:
>>       const: olpc,xo1.75-ec
>>   -  cmd-gpios:
>> +  cmd-gpio:
>
> Preference is gpios not gpio. But Rob H accept or reject

Look at the search result below. It seems that the driver have not been merged into mainline.
But the property name is really used as cmd-gpio at mmp2-olpc-xo-1-75.dts:235, I don't think
the mmp2-olpc-xo-1-75.dts can make a mistake. Otherwise, the driver will not work properly.
Meanwhile, Both names cmd-gpios and cmd-gpio seem to be in use. But I prefer cmd-gpio, after
all, only one gpio is assigned now. The motorola,cmd-gpios add "s" because it contains 3 gpio.

Without this patch:
git grep -wn "cmd-gpios"
Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml:27: cmd-gpios:
Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml:35: - cmd-gpios
Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml:52: cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt:10:- motorola,cmd-gpios Three GPIOs to control the power state of the MDM6600
Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt:22: motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
arch/arm/boot/dts/motorola-mapphone-common.dtsi:78: motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,

git grep -wn "cmd-gpio"
Documentation/devicetree/bindings/leds/leds-ns2.txt:9:- cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification.
Documentation/devicetree/bindings/leds/leds-ns2.txt:12: the corresponding cmd-gpio/slow-gpio values. All the GPIO values combinations
Documentation/devicetree/bindings/leds/leds-ns2.txt:29: cmd-gpio = <&gpio0 30 0>;
arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts:90: cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts:100: cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
arch/arm/boot/dts/kirkwood-d2net.dts:29: cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
arch/arm/boot/dts/kirkwood-is2.dts:31: cmd-gpio = <&gpio0 30 0>;
arch/arm/boot/dts/kirkwood-ns2.dts:31: cmd-gpio = <&gpio0 30 0>;
arch/arm/boot/dts/kirkwood-ns2max.dts:50: cmd-gpio = <&gpio0 30 0>;
arch/arm/boot/dts/kirkwood-ns2mini.dts:51: cmd-gpio = <&gpio0 30 0>;
arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:235: cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>;

>
> Dan
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>

\
 
 \ /
  Last update: 2020-10-14 03:30    [W:0.180 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site