lkml.org 
[lkml]   [2020]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 0/5] Unify NUMA implementation between ARM64 & RISC-V
On Mon, Oct 5, 2020 at 5:18 PM Atish Patra <atish.patra@wdc.com> wrote:
>
> This series attempts to move the ARM64 numa implementation to common
> code so that RISC-V can leverage that as well instead of reimplementing
> it again.
>
> RISC-V specific bits are based on initial work done by Greentime Hu [1] but
> modified to reuse the common implementation to avoid duplication.
>
> [1] https://lkml.org/lkml/2020/1/10/233
>
> This series has been tested on qemu with numa enabled for both RISC-V & ARM64.
> It would be great if somebody can test it on numa capable ARM64 hardware platforms.
> This patch series doesn't modify the maintainers list for the common code (arch_numa)
> as I am not sure if somebody from ARM64 community or Greg should take up the
> maintainership. Ganapatrao was the original author of the arm64 version.
> I would be happy to update that in the next revision once it is decided.
>
> # numactl --hardware
> available: 2 nodes (0-1)
> node 0 cpus: 0 1 2 3
> node 0 size: 486 MB
> node 0 free: 470 MB
> node 1 cpus: 4 5 6 7
> node 1 size: 424 MB
> node 1 free: 408 MB
> node distances:
> node 0 1
> 0: 10 20
> 1: 20 10
> # numactl -show
> policy: default
> preferred node: current
> physcpubind: 0 1 2 3 4 5 6 7
> cpubind: 0 1
> nodebind: 0 1
> membind: 0 1
>
> The patches are also available at
> https://github.com/atishp04/linux/tree/5.10_numa_unified_v4
>
> For RISC-V, the following qemu series is a pre-requisite(already available in upstream)
> https://patchwork.kernel.org/project/qemu-devel/list/?series=303313
>
> Testing:
> RISC-V:
> Tested in Qemu and 2 socket OmniXtend FPGA.
>
> ARM64:
> 2 socket kunpeng920 (4 nodes around 250G a node)
> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>
> There may be some minor conflicts with Mike's cleanup series [2] depending on the
> order in which these two series are being accepted. I can rebase on top his series
> if required.
>
> [2] https://lkml.org/lkml/2020/8/18/754
>
> Changes from v3->v4:
> 1. Removed redundant duplicate header.
> 2. Added Reviewed-by tags.
>
> Changes from v2->v3:
> 1. Added Acked-by/Reviewed-by tags.
> 2. Replaced asm/acpi.h with linux/acpi.h
> 3. Defined arch_acpi_numa_init as static.
>
> Changes from v1->v2:
> 1. Replaced ARM64 specific compile time protection with ACPI specific ones.
> 2. Dropped common pcibus_to_node changes. Added required changes in RISC-V.
> 3. Fixed few typos.
>
> Atish Patra (4):
> numa: Move numa implementation to common code
> arm64, numa: Change the numa init functions name to be generic
> riscv: Separate memory init from paging init
> riscv: Add numa support for riscv64 platform
>
> Greentime Hu (1):
> riscv: Add support pte_protnone and pmd_protnone if
> CONFIG_NUMA_BALANCING
>
> arch/arm64/Kconfig | 1 +
> arch/arm64/include/asm/numa.h | 45 +----------------
> arch/arm64/kernel/acpi_numa.c | 13 -----
> arch/arm64/mm/Makefile | 1 -
> arch/arm64/mm/init.c | 4 +-
> arch/riscv/Kconfig | 31 +++++++++++-
> arch/riscv/include/asm/mmzone.h | 13 +++++
> arch/riscv/include/asm/numa.h | 8 +++
> arch/riscv/include/asm/pci.h | 14 ++++++
> arch/riscv/include/asm/pgtable.h | 21 ++++++++
> arch/riscv/kernel/setup.c | 11 ++++-
> arch/riscv/kernel/smpboot.c | 12 ++++-
> arch/riscv/mm/init.c | 10 +++-
> drivers/base/Kconfig | 6 +++
> drivers/base/Makefile | 1 +
> .../mm/numa.c => drivers/base/arch_numa.c | 30 ++++++++++--
> include/asm-generic/numa.h | 49 +++++++++++++++++++
> 17 files changed, 199 insertions(+), 71 deletions(-)
> create mode 100644 arch/riscv/include/asm/mmzone.h
> create mode 100644 arch/riscv/include/asm/numa.h
> rename arch/arm64/mm/numa.c => drivers/base/arch_numa.c (95%)
> create mode 100644 include/asm-generic/numa.h
>
> --
> 2.25.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

Ping ?

--
Regards,
Atish

\
 
 \ /
  Last update: 2020-10-13 22:20    [W:0.183 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site