lkml.org 
[lkml]   [2020]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 3/6] drivers: hwmon: Add the iEi WT61P803 PUZZLE HWMON driver
From
Date
On 10/13/20 11:09 AM, Luka Kovacic wrote:
> Hello Guenter,
>
> On Sun, Oct 11, 2020 at 11:26 PM Guenter Roeck <linux@roeck-us.net> wrote:
>>
>> On Wed, Oct 07, 2020 at 02:48:58AM +0200, Luka Kovacic wrote:
>>> Add the iEi WT61P803 PUZZLE HWMON driver, that handles the fan speed
>>> control via PWM, reading fan speed and reading on-board temperature
>>> sensors.
>>>
>>> The driver registers a HWMON device and a simple thermal cooling device to
>>> enable in-kernel fan management.
>>>
>>> This driver depends on the iEi WT61P803 PUZZLE MFD driver.
>>>
>>> Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
>>> Cc: Luka Perkov <luka.perkov@sartura.hr>
>>> Cc: Robert Marko <robert.marko@sartura.hr>
>>> ---
>>> drivers/hwmon/Kconfig | 8 +
>>> drivers/hwmon/Makefile | 1 +
>>> drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 457 ++++++++++++++++++++++
>>> 3 files changed, 466 insertions(+)
>>> create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
>>>
>>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
>>> index 8dc28b26916e..ff279df9bf40 100644
>>> --- a/drivers/hwmon/Kconfig
>>> +++ b/drivers/hwmon/Kconfig
>>> @@ -722,6 +722,14 @@ config SENSORS_IBMPOWERNV
>>> This driver can also be built as a module. If so, the module
>>> will be called ibmpowernv.
>>>
>>> +config SENSORS_IEI_WT61P803_PUZZLE_HWMON
>>> + tristate "iEi WT61P803 PUZZLE MFD HWMON Driver"
>>> + depends on MFD_IEI_WT61P803_PUZZLE
>>> + help
>>> + The iEi WT61P803 PUZZLE MFD HWMON Driver handles reading fan speed
>>> + and writing fan PWM values. It also supports reading on-board
>>> + temperature sensors.
>>> +
>>> config SENSORS_IIO_HWMON
>>> tristate "Hwmon driver that uses channels specified via iio maps"
>>> depends on IIO
>>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
>>> index a8f4b35b136b..b0afb2d6896f 100644
>>> --- a/drivers/hwmon/Makefile
>>> +++ b/drivers/hwmon/Makefile
>>> @@ -83,6 +83,7 @@ obj-$(CONFIG_SENSORS_HIH6130) += hih6130.o
>>> obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o
>>> obj-$(CONFIG_SENSORS_I5500) += i5500_temp.o
>>> obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o
>>> +obj-$(CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON) += iei-wt61p803-puzzle-hwmon.o
>>> obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
>>> obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
>>> obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o
>>> diff --git a/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
>>> new file mode 100644
>>> index 000000000000..be7b019d126c
>>> --- /dev/null
>>> +++ b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
>>> @@ -0,0 +1,457 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>> +/* iEi WT61P803 PUZZLE MCU HWMON Driver
>>> + *
>>> + * Copyright (C) 2020 Sartura Ltd.
>>> + * Author: Luka Kovacic <luka.kovacic@sartura.hr>
>>> + */
>>> +
>>> +#include <linux/err.h>
>>> +#include <linux/hwmon-sysfs.h>
>>> +#include <linux/hwmon.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/irq.h>
>>> +#include <linux/math64.h>
>>> +#include <linux/mfd/iei-wt61p803-puzzle.h>
>>> +#include <linux/mod_devicetable.h>
>>> +#include <linux/module.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/property.h>
>>> +#include <linux/slab.h>
>>> +#include <linux/thermal.h>
>>> +
>>> +#define IEI_WT61P803_PUZZLE_HWMON_MAX_TEMP_NUM 2
>>> +#define IEI_WT61P803_PUZZLE_HWMON_MAX_FAN_NUM 5
>>> +#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_NUM 2
>>> +#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL 255
>>> +
>>> +/**
>>> + * struct iei_wt61p803_puzzle_thermal_cooling_device - Thermal cooling device instance
>>> + *
>>> + * @mcu_hwmon: MCU HWMON struct pointer
>>> + * @tcdev: Thermal cooling device pointer
>>> + * @name: Thermal cooling device name
>>> + * @pwm_channel: PWM channel (0 or 1)
>>> + * @cooling_levels: Thermal cooling device cooling levels
>>> + */
>>> +struct iei_wt61p803_puzzle_thermal_cooling_device {
>>> + struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
>>> + struct thermal_cooling_device *tcdev;
>>> + char name[THERMAL_NAME_LENGTH];
>>> + int pwm_channel;
>>> + u8 *cooling_levels;
>>> +};
>>> +
>>> +/**
>>> + * struct iei_wt61p803_puzzle_hwmon - MCU HWMON Driver
>>> + *
>>> + * @mcu: MCU struct pointer
>>> + * @response_buffer Global MCU response buffer allocation
>>> + * @thermal_cooling_dev_present: Per-channel thermal cooling device control
>>> + * @cdev: Per-channel thermal cooling device private structure
>>> + */
>>> +struct iei_wt61p803_puzzle_hwmon {
>>> + struct iei_wt61p803_puzzle *mcu;
>>> + unsigned char *response_buffer;
>>> + bool thermal_cooling_dev_present[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_NUM];
>>> + struct iei_wt61p803_puzzle_thermal_cooling_device
>>> + *cdev[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_NUM];
>>> +};
>>> +
>>> +#define raw_temp_to_milidegree_celsius(x) ((int)(((x) - 0x80) * 1000))
>>> +static int iei_wt61p803_puzzle_read_temp_sensor(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
>>> + int channel, int *value)
>>> +{
>>> + unsigned char *resp_buf = mcu_hwmon->response_buffer;
>>> + unsigned char temp_sensor_ntc_cmd[4] = {
>>
>> static ?
> These can be changed to static to avoid reallocations, every time the
> function is called.
> Although I will always have to assign these values anyway.
>>
>>> + IEI_WT61P803_PUZZLE_CMD_HEADER_START,
>>> + IEI_WT61P803_PUZZLE_CMD_TEMP,
>>> + IEI_WT61P803_PUZZLE_CMD_TEMP_ALL
>>> + };
>>> + size_t reply_size = 0;
>>> + int ret;
>>> +
>>> + ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, temp_sensor_ntc_cmd,
>>> + sizeof(temp_sensor_ntc_cmd), resp_buf,
>>> + &reply_size);
>>> +
>>> + if (ret)
>>> + return ret;
>>> +
>>> + /* Check the number of NTC values (should be 0x32/'2') */
>>> + if (resp_buf[3] != 0x32)
>>> + return -EIO;
>>> +
>>> + *value = raw_temp_to_milidegree_celsius(resp_buf[4 + channel]);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +#define raw_fan_val_to_rpm(x, y) ((int)(((x) << 8 | (y)) / 2) * 60)
>>> +static int iei_wt61p803_puzzle_read_fan_speed
>>> +(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon, int channel, int *value)
>>> +{
>>> + unsigned char *resp_buf = mcu_hwmon->response_buffer;
>>> + static const u8 fan_speed_cmds[] = {
>>> + IEI_WT61P803_PUZZLE_CMD_FAN_RPM_0,
>>> + IEI_WT61P803_PUZZLE_CMD_FAN_RPM_1,
>>> + IEI_WT61P803_PUZZLE_CMD_FAN_RPM_2,
>>> + IEI_WT61P803_PUZZLE_CMD_FAN_RPM_3,
>>> + IEI_WT61P803_PUZZLE_CMD_FAN_RPM_4
>>> + };
>>> + unsigned char fan_speed_cmd[4] = {
>>> + IEI_WT61P803_PUZZLE_CMD_HEADER_START,
>>> + IEI_WT61P803_PUZZLE_CMD_FAN,
>>> + IEI_WT61P803_PUZZLE_CMD_FAN_RPM_0
>>
>> This is unconditionally overwritten below.
> I also add it to the array, to make it easier to read if someone is
> debugging the code.

That doesn't make it easier. It causes everyone (including me) to wonder
if the overwrite index is wrong, and having to look into details
to notice that the overwritten value is similar. And that has to be
repeated for each of the functions over and over again, because
after all one can not be sure if the submitter maybe got
some index wrong.

That kind of code in your driver caused me to get stuck on that level
of review, and I didn't even get to the point where I actually reviewed
the _real_ code. That kind of code is extremely difficult to review,
it takes a lot of time to do it, and it can easily result in missing
the real problems.

Really, code such as
unsigned char fan_speed_cmd[4] = {};
...

fan_speed_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
fan_speed_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
fan_speed_cmd[2] = fan_speed_cmds[channel];

may not look as fancy, but it would be much easier to understand,
and it would be much easier to see that it does what it is supposed
to do.

FWIW, the same is true for the actual commands. It is obviously
your call, but something like

#define IEI_WT61P803_PUZZLE_CMD_FAN_RPM_BASE 'A'
#define IEI_WT61P803_PUZZLE_CMD_FAN_RPM(x) (IEI_WT61P803_PUZZLE_CMD_FAN_RPM_BASE + (x))

fan_speed_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_RPM(channel)

would be much easier to understand and be more straightforward
than all those arrays.

Guenter

>>
>>> + };
>>> + size_t reply_size = 0;
>>> + int ret;
>>> +
>>> + fan_speed_cmd[2] = fan_speed_cmds[channel];
>>> +
>>> + ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, fan_speed_cmd,
>>> + sizeof(fan_speed_cmd), resp_buf,
>>> + &reply_size);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + *value = raw_fan_val_to_rpm(resp_buf[3], resp_buf[4]);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int iei_wt61p803_puzzle_write_pwm_channel
>>> +(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon, int channel, long pwm_set_val)
>>> +{
>>> + unsigned char *resp_buf = mcu_hwmon->response_buffer;
>>> + static const u8 pwm_set_cmds[] = {
>>> + IEI_WT61P803_PUZZLE_CMD_FAN_PWM_0,
>>> + IEI_WT61P803_PUZZLE_CMD_FAN_PWM_1
>>> + };
>>> + unsigned char pwm_set_cmd[6] = {
>>> + IEI_WT61P803_PUZZLE_CMD_HEADER_START,
>>> + IEI_WT61P803_PUZZLE_CMD_FAN,
>>> + IEI_WT61P803_PUZZLE_CMD_FAN_PWM_WRITE,
>>> + IEI_WT61P803_PUZZLE_CMD_FAN_PWM_0,
>>
>> Another unconditional overwrite.
>>
>>> + 0x00
>>
>> As is this, and more below. Guess it is on purpose, but I don't
>> see the point.
> This one can be removed as it's calculated by the
> iei_wt61p803_puzzle_write_command
> function.
>>
>>> + };
>>> + size_t reply_size = 0;
>>> + int ret;
>>> +
>>> + pwm_set_cmd[3] = pwm_set_cmds[channel];
>>> +
>>> + /* Add the PWM value to the command */
>>> + pwm_set_cmd[4] = (unsigned char)pwm_set_val;
>>> +
>>> + ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_set_cmd,
>>> + sizeof(pwm_set_cmd), resp_buf,
>>> + &reply_size);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + /* Store the PWM value */
>>> + if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
>>> + resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
>>> + resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK))
>>> + return -EIO;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int iei_wt61p803_puzzle_read_pwm_channel
>>> +(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon, int channel, int *value)
>>
>> I am sure I mentioned before that I don't like those odd follow-up line
>> indentations.
> I'll fix these, sorry.
>>
>>> +{
>>> + unsigned char *resp_buf = mcu_hwmon->response_buffer;
>>> + static const u8 pwm_get_cmds[] = {
>>> + IEI_WT61P803_PUZZLE_CMD_FAN_PWM_0,
>>> + IEI_WT61P803_PUZZLE_CMD_FAN_PWM_1
>>> + };
>>> + unsigned char pwm_get_cmd[5] = {
>>> + IEI_WT61P803_PUZZLE_CMD_HEADER_START,
>>> + IEI_WT61P803_PUZZLE_CMD_FAN,
>>> + IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ,
>>> + IEI_WT61P803_PUZZLE_CMD_FAN_PWM_0
>>> + };
>>> + size_t reply_size = 0;
>>> + int ret;
>>> +
>>> + pwm_get_cmd[3] = pwm_get_cmds[channel];
>>> +
>>> + ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_get_cmd,
>>> + sizeof(pwm_get_cmd), resp_buf,
>>> + &reply_size);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + if (resp_buf[2] != IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ)
>>> + return -EIO;
>>> +
>>> + *value = resp_buf[3];
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int iei_wt61p803_puzzle_read(struct device *dev, enum hwmon_sensor_types type,
>>> + u32 attr, int channel, long *val)
>>> +{
>>> + struct iei_wt61p803_puzzle_hwmon *mcu_hwmon =
>>> + dev_get_drvdata(dev->parent);
>>> + int ret, value;
>>> +
>>> + switch (type) {
>>> + case hwmon_pwm:
>>> + if (attr != hwmon_pwm_input)
>>> + return -ENODEV;
>>
>> Those are all unnecessary tests, and -ENODEV is wrong.
> Okay, I can remove the attr tests.
>>
>>> + ret = iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon, channel, &value);
>>> + if (ret)
>>> + return ret;
>>> + *val = (long)value;
>>
>> Unnecessary type cast. The return value of this function is _always_
>> type casted, which really doesn't make sense.
>>
>>> + return ret;
>>> + case hwmon_fan:
>>> + if (attr != hwmon_fan_input)
>>> + return -ENODEV;
>>> + ret = iei_wt61p803_puzzle_read_fan_speed(mcu_hwmon, channel, &value);
>>> + if (ret)
>>> + return ret;
>>> + *val = (long)value;
>>> + return ret;
>>> + case hwmon_temp:
>>> + if (attr != hwmon_temp_input)
>>> + return -ENODEV;
>>> + ret = iei_wt61p803_puzzle_read_temp_sensor(mcu_hwmon, channel, &value);
>>> + if (ret)
>>> + return ret;
>>> + *val = (long)value;
>>
>> Hmm, seems like you like type casts. Ok, I'll want to see an explanation
>> for each of those: Explain why the function argument is an int *, and
>> explain why the it is necessary to type cast the result here.
> I'll change the function argument to long * to avoid these.
>>
>>> + return ret;
>>> + default:
>>> + return -ENODEV;
>>> + }
>>> +}
>>> +
>>> +static int iei_wt61p803_puzzle_write(struct device *dev, enum hwmon_sensor_types type,
>>> + u32 attr, int channel, long val)
>>> +{
>>> + struct iei_wt61p803_puzzle_hwmon *mcu_hwmon =
>>> + dev_get_drvdata(dev->parent);
>>> +
>>> + if (attr != hwmon_pwm_input)
>>> + return -ENODEV;
>>> + if (mcu_hwmon->thermal_cooling_dev_present[channel]) {
>>> + /*
>>> + * The Thermal Framework has already claimed this specific PWM
>>> + * channel.
>>
>> ... and if it did, this code won't be called. I am sure I mentioned
>> this before. If you insist keeping it, I'll want to see an explanation
>> here because I don't want to have to deal with follow-up patches removing
>> the unnecessary code.
> In the previous patch this was done here and by setting the visibility
> (umode_t).
> I'd rather return an error with more context to the user instead of
> just changing
> the permissions on the sysfs attribute.
>>
>>> + */
>>> + return -EBUSY;
>>> + }
>>> + return iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon, channel, val);
>>> +}
>>> +
>>> +static umode_t iei_wt61p803_puzzle_is_visible(const void *data, enum hwmon_sensor_types type,
>>> + u32 attr, int channel)
>>> +{
>>> + switch (type) {
>>> + case hwmon_pwm:
>>> + switch (attr) {
>>> + case hwmon_pwm_input:
>>> + return 0644;
>>> + default:
>>> + return 0;
>>> + }
>>> + case hwmon_fan:
>>> + switch (attr) {
>>> + case hwmon_fan_input:
>>> + return 0444;
>>> + default:
>>> + return 0;
>>> + }
>>> + case hwmon_temp:
>>> + switch (attr) {
>>> + case hwmon_temp_input:
>>> + return 0444;
>>> + default:
>>> + return 0;
>>> + }
>>> + default:
>>> + return 0;
>>> + }
>>> +}
>>> +
>>> +static const struct hwmon_ops iei_wt61p803_puzzle_hwmon_ops = {
>>> + .is_visible = iei_wt61p803_puzzle_is_visible,
>>> + .read = iei_wt61p803_puzzle_read,
>>> + .write = iei_wt61p803_puzzle_write,
>>> +};
>>> +
>>> +static const struct hwmon_channel_info *iei_wt61p803_puzzle_info[] = {
>>> + HWMON_CHANNEL_INFO(pwm,
>>> + HWMON_PWM_INPUT,
>>> + HWMON_PWM_INPUT),
>>> + HWMON_CHANNEL_INFO(fan,
>>> + HWMON_F_INPUT,
>>> + HWMON_F_INPUT,
>>> + HWMON_F_INPUT,
>>> + HWMON_F_INPUT,
>>> + HWMON_F_INPUT),
>>> + HWMON_CHANNEL_INFO(temp,
>>> + HWMON_T_INPUT,
>>> + HWMON_T_INPUT),
>>> + NULL
>>> +};
>>> +
>>> +static const struct hwmon_chip_info iei_wt61p803_puzzle_chip_info = {
>>> + .ops = &iei_wt61p803_puzzle_hwmon_ops,
>>> + .info = iei_wt61p803_puzzle_info,
>>> +};
>>> +
>>> +static int iei_wt61p803_puzzle_get_max_state(struct thermal_cooling_device *tcdev,
>>> + unsigned long *state)
>>> +{
>>> + *state = IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int iei_wt61p803_puzzle_get_cur_state(struct thermal_cooling_device *tcdev,
>>> + unsigned long *state)
>>> +{
>>> + struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
>>> + struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = cdev->mcu_hwmon;
>>> +
>>> + int ret, value;
>>> +
>>> + if (!mcu_hwmon)
>>> + return -EINVAL;
>>
>> This check needs to be explained.
> This is not needed and will be removed.
>>
>>> +
>>> + ret = iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon, cdev->pwm_channel, &value);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + *state = (unsigned long)value;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int iei_wt61p803_puzzle_set_cur_state
>>> +(struct thermal_cooling_device *tcdev, unsigned long state)
>>> +{
>>> + struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
>>> + struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = cdev->mcu_hwmon;
>>> +
>>> + if (!mcu_hwmon)
>>> + return -EINVAL;
>>> +
>>> + return iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon, cdev->pwm_channel, state);
>>> +}
>>> +
>>> +static const struct thermal_cooling_device_ops iei_wt61p803_puzzle_cooling_ops = {
>>> + .get_max_state = iei_wt61p803_puzzle_get_max_state,
>>> + .get_cur_state = iei_wt61p803_puzzle_get_cur_state,
>>> + .set_cur_state = iei_wt61p803_puzzle_set_cur_state,
>>> +};
>>> +
>>> +static int iei_wt61p803_puzzle_enable_thermal_cooling_dev
>>> +(struct device *dev, struct fwnode_handle *child, struct iei_wt61p803_puzzle_hwmon *mcu_hwmon)
>>> +{
>>> + struct iei_wt61p803_puzzle_thermal_cooling_device *cdev;
>>> + int ret, num_levels;
>>> + u32 pwm_channel;
>>> +
>>> + ret = fwnode_property_read_u32(child, "reg", &pwm_channel);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + mcu_hwmon->thermal_cooling_dev_present[pwm_channel] = true;
>>> +
>>> + num_levels = fwnode_property_read_u8_array(child, "cooling-levels", NULL, 0);
>>> + if (num_levels > 0) {
>>> + cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL);
>>> + if (!cdev)
>>> + return -ENOMEM;
>>> +
>>> + cdev->cooling_levels = devm_kzalloc(dev, num_levels, GFP_KERNEL);
>>> + if (!cdev->cooling_levels)
>>> + return -ENOMEM;
>>> +
>>> + ret = fwnode_property_read_u8_array(child, "cooling-levels",
>>> + cdev->cooling_levels,
>>> + num_levels);
>>> + if (ret) {
>>> + dev_err(dev, "Couldn't read property 'cooling-levels'");
>>> + return ret;
>>> + }
>>> +
>>> + snprintf(cdev->name, THERMAL_NAME_LENGTH, "iei_wt61p803_puzzle_%d", pwm_channel);
>>> +
>>> + cdev->tcdev = devm_thermal_of_cooling_device_register(dev, NULL,
>>> + cdev->name, cdev, &iei_wt61p803_puzzle_cooling_ops);
>>> + if (IS_ERR(cdev->tcdev))
>>> + return PTR_ERR(cdev->tcdev);
>>> +
>>> + cdev->mcu_hwmon = mcu_hwmon;
>>> + cdev->pwm_channel = pwm_channel;
>>> +
>>> + mcu_hwmon->cdev[pwm_channel] = cdev;
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +static int iei_wt61p803_puzzle_hwmon_probe(struct platform_device *pdev)
>>> +{
>>> + struct device *dev = &pdev->dev;
>>> + struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
>>> + struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
>>> + struct fwnode_handle *child;
>>> + struct device *hwmon_dev;
>>> + int ret;
>>> +
>>> + mcu_hwmon = devm_kzalloc(dev, sizeof(*mcu_hwmon), GFP_KERNEL);
>>> + if (!mcu_hwmon)
>>> + return -ENOMEM;
>>> +
>>> + mcu_hwmon->response_buffer = devm_kzalloc(dev, IEI_WT61P803_PUZZLE_BUF_SIZE, GFP_KERNEL);
>>> + if (!mcu_hwmon->response_buffer)
>>> + return -ENOMEM;
>>> +
>>> + mcu_hwmon->mcu = mcu;
>>> + platform_set_drvdata(pdev, mcu_hwmon);
>>> +
>>> + hwmon_dev = devm_hwmon_device_register_with_info(dev, "iei_wt61p803_puzzle",
>>> + mcu_hwmon,
>>> + &iei_wt61p803_puzzle_chip_info,
>>> + NULL);
>>> +
>>> + if (IS_ERR(hwmon_dev))
>>> + return PTR_ERR(hwmon_dev);
>>> +
>>> + /* Control fans via PWM lines via Linux Kernel */
>>> + if (IS_ENABLED(CONFIG_THERMAL)) {
>>> + device_for_each_child_node(dev, child) {
>>> + ret = iei_wt61p803_puzzle_enable_thermal_cooling_dev(dev, child, mcu_hwmon);
>>> + if (ret) {
>>> + dev_err(dev, "Enabling the PWM fan failed\n");
>>> + fwnode_handle_put(child);
>>> + return ret;
>>> + }
>>> + }
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +static const struct of_device_id iei_wt61p803_puzzle_hwmon_id_table[] = {
>>> + { .compatible = "iei,wt61p803-puzzle-hwmon" },
>>> + {}
>>> +};
>>> +MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_hwmon_id_table);
>>> +
>>> +static struct platform_driver iei_wt61p803_puzzle_hwmon_driver = {
>>> + .driver = {
>>> + .name = "iei-wt61p803-puzzle-hwmon",
>>> + .of_match_table = iei_wt61p803_puzzle_hwmon_id_table,
>>> + },
>>> + .probe = iei_wt61p803_puzzle_hwmon_probe,
>>> +};
>>> +
>>> +module_platform_driver(iei_wt61p803_puzzle_hwmon_driver);
>>> +
>>> +MODULE_DESCRIPTION("iEi WT61P803 PUZZLE MCU HWMON Driver");
>>> +MODULE_AUTHOR("Luka Kovacic <luka.kovacic@sartura.hr>");
>>> +MODULE_LICENSE("GPL");
>>> --
>>> 2.26.2
>>>
>
> Kind regards,
> Luka
>

\
 
 \ /
  Last update: 2020-10-13 20:53    [W:0.095 / U:5.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site