lkml.org 
[lkml]   [2020]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/3] dt-bindings: rtc: add trickle-voltage-millivolt
On 13/10/2020 08:38:55-0500, Rob Herring wrote:
> On Thu, Oct 08, 2020 at 12:05:04AM +0200, Alexandre Belloni wrote:
> > Some RTCs have a trickle charge that is able to output different voltages
> > depending on the type of the connected auxiliary power (battery, supercap,
> > ...). Add a property allowing to specify the necessary voltage.
> >
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> > ---
> >
> > Changes in v2:
> > - use millivolt suffix instead of mV
>
> Try again...

Sorry, the change was wrongly squashed in patch 2/3, I've sent v3.

>
> >
> > Documentation/devicetree/bindings/rtc/rtc.yaml | 7 +++++++
> > 1 file changed, 7 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml
> > index ee237b2ed66a..93f04d5e5307 100644
> > --- a/Documentation/devicetree/bindings/rtc/rtc.yaml
> > +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml
> > @@ -42,6 +42,13 @@ properties:
> > Selected resistor for trickle charger. Should be given
> > if trickle charger should be enabled.
> >
> > + trickle-voltage-mV:
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + description:
> > + Selected voltage for trickle charger. Should be given
> > + if trickle charger should be enabled and the trickle voltage is different
> > + from the RTC main power supply.
> > +
> > wakeup-source:
> > $ref: /schemas/types.yaml#/definitions/flag
> > description:
> > --
> > 2.26.2
> >

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2020-10-13 16:42    [W:0.072 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site